JST FTR Series Insulated Crimp Bootlace Ferrule, 8mm Pin Length, 1mm Pin Diameter, 0.5mm² Wire Size, White

  • RS-stocknr. 122-5194
  • Fabrikantnummer FTR0.5-8
  • Fabrikant JST
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

JST French Colour-Coded Insulated Bootlace Ferrule Crimp Terminals

A range of industrial standard French colour coded insulated bootlace ferrule crimp terminals. These insulated bootlace ferrule crimp terminals are made from oxygen free copper which is both robust and highly conductive with excellent mechanical and electrical characteristics. The terminals are then electroplated with tin and treated by a special process developed by JST. This method ensures that there is maximum adhesion of the electroplating, reduces electrical resistance and increases resistance to corrosion. The insulation of these bootlace crimp ferrules is made from polypropylene which has excellent flame resistance and insulation properties. These insulated bootlace crimp ferrules are available in various wire sizes.

JST Bootlace Ferrules

Specificaties
Kenmerk Waarde
Maximum Wire Size mm² 0.5mm²
Pin Diameter 1mm
Number of Entries 1
Insulation Material PP
Colour White
Pin Length 8mm
Insulation Insulated
Maximum Wire Size AWG 20AWG
Overall Length 14mm
Series FTR
8500 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
18100 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Bag of 100)
0,04
(excl. BTW)
0,05
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
100 +
€ 0,04
€ 4,00
*prijsindicatie
Related Products
Ferrules available in the French colour code range ...
Description:
Ferrules available in the French colour code range in sizes 0·5 to 2·5mm².,Each pack of ferrules contain 10 strips of 50, which can be rapidly terminated with a special tool, with automatic feed action enables cables to be cut, stripped ...
Stacking (with central hole of 7 mm) rotating ...
Description:
Stacking (with central hole of 7 mm) rotating lid with window. ApplicationsRound dispenser boxIdeal for work on siteA wide range of permanently available connectors No loss of time.
Stripax plus pliers allow you to cut, strip ...
Description:
Stripax plus pliers allow you to cut, strip wires between 0.5 and 2.5 mm2 and crimp wire-end ferrules with the same cross section.Wires can be cut and stripped without clutch crimping the wire-end ferrules. Crimping complies with EN standard 50027 ...
Cable ends consisting of a tin-plated copper tube.The ...
Description:
Cable ends consisting of a tin-plated copper tube.The copper tube envelops the strands of the flexible conductor and facilitates introduction into terminals.These ends are available for conductors with cross-sections from 0.25 → 16 mm2, in different colours.Versions with short or ...