RS PRO Crimp Bootlace Ferrule, 10mm Pin Length, 2.6mm Pin Diameter, 2.5mm² Wire Size

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS Pro Uninsulated Bootlace Ferrules

From RS Pro a range of high-quality uninsulated bootlace ferrules (also known as cord end terminals) for providing an economical and effective method of terminating multi-stranded wires. These reliable wire ferrules ensure that you have a positive connection when connecting wires to terminal blocks and captive terminals.

What Is a Bootlace Ferrule?
A bootlace ferrule is a metal tube or ferrule with (or without) a moulded colour coded insulating collar made from nylon. The ferrule is slipped over the end of a multi-stranded wire, crimped and then inserted into a screw or spring clamp connection.

Where is a Bootlace Ferrule Used?
When the end of a multi-stranded wire is stripped and placed directly under a screw terminal the strands of the wire will naturally fan out under the pressure of the screw. Some strands will go astray. This reduces the quality of the electrical connection and can also result in electrical shorts. When a bootlace ferrule is used it's flared design captures all the strands. These strands are then crimped together in the ferrule tube. The crimped ferrule is then inserted into the terminal to create an electrical connection

Features and Benefits
• Excellent electrical connection
• Reduces short circuits
• Tin plated copper tube for excellent conductivity
• Crimped terminal can be repeatedly inserted and removed without degrading end of the wire

Applications
Bootlace ferrules are used on multi-stranded wires that are being inserted into screw terminals and terminal blocks. Applications include consumer units, circuit breakers, electrical control panels and any equipment where there is a requirement for a multi-stranded wire connection.

How to Crimp a Bootlace Ferrule

How to Crimp a Bootlace Ferrule
Select the correct size bootlace ferrule and strip the end of the wire. Cut the wires to the same length as terminal and twist the strands together. Slip the bootlace ferrule onto the ends of the wire until the wire strands are flush with the end of the tube. Using a ratchet crimping tool, insert the metal tube of the ferrule into the appropriate crimping section (indicated by sizes marked on the tool). Squeeze the tool handles together until the ratchet releases. A ratchet crimping tool is preferable as the handles will remain locked until a full crimp cycle is completed preventing partial crimps. The crimped wire end is now ready to be inserted into connecting terminal

Suitable Crimping Tools
For ferrules with a wire size range of 0.25 to 6 mm2 use crimping tool frame stock number 848-391 with crimping die 848-420

Approvals

-

Specificaties
Kenmerk Waarde
Maximum Wire Size mm² 2.5mm²
Pin Diameter 2.6mm
Number of Entries 1
Pin Length 10mm
Insulation Uninsulated
Maximum Wire Size AWG 14AWG
Overall Length 10mm
16500 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
86400 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
0,035
(excl. BTW)
0,042
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
€ 0,035
€ 3,50
500 - 2400
€ 0,03
€ 3,00
2500 - 4900
€ 0,026
€ 2,60
5000 - 9900
€ 0,023
€ 2,30
10000 +
€ 0,019
€ 1,90
*prijsindicatie
Related Products
A range of industrial standard uninsulated bootlace ferrule ...
Description:
A range of industrial standard uninsulated bootlace ferrule crimp terminals with a twin cable entry. These bootlace ferrule crimp terminals are made from oxygen free copper which is both robust and highly conductive with excellent mechanical and electrical characteristics. The ...
Insulated tube end fittings for bridging or looping ...
Description:
Insulated tube end fittings for bridging or looping two conductors on the same terminal.
Starfix® is a cable end design that offers ...
Description:
Starfix® is a cable end design that offers a time saving of up to 50% compared to a standard connector.Simple, reliable and economic, this system allows crimping and cabling to be carried out in the same place.
Cable ends comprising a tinned copper tube with ...
Description:
Cable ends comprising a tinned copper tube with a moulded isolating collar at the end.The copper tube envelops the strands of the flexible conductor and facilitates introduction into terminals.These ends are available for conductors with cross-sections from 0.5 → 2.5 ...