TE Connectivity Parallel Wire Splice Connector, Red, Insulated, Tin Plated 22 → 16 AWG

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity PLASTI-GRIP Parallel Splice Wire Crimp Terminals

PLASTI-GRIP closed barrel parallel splice wire crimp terminals made of high conductivity tin plated copper with an expanded high dielectric strength 94V-0 rated vinyl insulation sleeve. The inner barrel of these PLASTI-GRIP parallel splice crimp terminals is serrated in order to provide maximum electrical contact and tensile strength after crimping. The funnelled entry on the wire barrel enables the stripped wire to be inserted more easily.

Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²

TE Connectivity Plasti-Grip Terminals

Temperature range: PVC -25°C to +90°C
  Nylon -55°C to +105°C
Termination material: Tin plated Copper  
Termination insulation: Rings, spades, wire pins  
  6.35mm blades, splices PVC
  6.35mm receptacles Nylon 6.6
  (including shrouded)  
Specificaties
Kenmerk Waarde
Splice Type Parallel
Wire Size 22 → 16 AWG
Overall Length 19.3mm
Diameter 3.56mm
Insulation Insulated
Colour Red
Contact Material Copper
Contact Plating Tin
500 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4500 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
0,286
(excl. BTW)
0,346
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
€ 0,286
€ 28,60
500 - 2400
€ 0,265
€ 26,50
2500 - 4900
€ 0,243
€ 24,30
5000 - 9900
€ 0,222
€ 22,20
10000 +
€ 0,201
€ 20,10
*prijsindicatie
Related Products
TE heat shrinkable pre-insulated nylon splices and crimp ...
Description:
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion ...
MiniSeal high performance immersion-resistant crimp splices designed to ...
Description:
MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is ...
MiniSeal high performance immersion-resistant crimp splices designed to ...
Description:
MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is ...
Scotchlok UB2A tap splice connector used for tapping ...
Description:
Scotchlok UB2A tap splice connector used for tapping into another conductor without interrupting service. This Scotchlok UB2A tap splice features a factory-installed sealant to protect against corrosion and seal out moisture. Inside the Scotchlok UB2A splice connector are U shaped ...