TE Connectivity Butt Wire Splice Connector, Yellow, Insulated 14 → 12 AWG

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

TE Connectivity Cold Applied In-Line Splices

Cold applied in-line splices that require no heating for installation and provide environmental sealing against moisture using a flame retardant silicone based gel sealing system and electrical isolation using a polymer outer layer. The crimp barrels of these splices are made from tin plated copper and the transparent polyvinylidene fluoride insulation sleeves have a colour coded end cap at either end. These cold applied in-line splices provide protection and sealing on all conventional MIL spec and commercial wire insulation systems.
Stock number 782-4755 is for use with a wire range of 26, 24, 22 and 20 AWG and has red colour coded caps at either end
Stock number 782-4768 is for use with a wire range of 18 to16 AWG and has blue colour coded caps at either end
Stock number 782-4759 is for use with a wire range of 14 to12 AWG and has yellow colour coded caps at either end

Note

An AD-1381 or approved M22520/44-01 crimp tool must be used for proper installation of these devices.

Standards

Meets or exceeds the following: SAE-AMS-DTL-23053/8 (Insulation sleeve), SAE-AS81824/12
Under qualification for SAE AS81824 and AS81824/12

Splices

Specificaties
Kenmerk Waarde
Splice Type Butt
Wire Size 14 → 12 AWG
Overall Length 38.7mm
Insulation Insulated
Colour Yellow
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 10-06-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
8,57
(excl. BTW)
10,37
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 8,57
5 - 24
€ 7,28
25 - 74
€ 6,01
75 - 149
€ 5,92
150 +
€ 5,91
Related Products
TERMI-FOIL SOLISTRAND wire terminals for use in the ...
Description:
TERMI-FOIL SOLISTRAND wire terminals for use in the manufacture of transformers making it possible to use aluminium foil strip instead of copper wire windings. These TERMI-FOIL wire terminals can be applied to bare, insulated, anodized or coated aluminium and bare ...
A range of industrial standard uninsulated bootlace ferrule ...
Description:
A range of industrial standard uninsulated bootlace ferrule crimp terminals with a twin cable entry. These bootlace ferrule crimp terminals are made from oxygen free copper which is both robust and highly conductive with excellent mechanical and electrical characteristics. The ...
Cable ends consisting of a tin-plated copper tube.The ...
Description:
Cable ends consisting of a tin-plated copper tube.The copper tube envelops the strands of the flexible conductor and facilitates introduction into terminals.These ends are available for conductors with cross-sections from 0.25 → 16 mm2, in different colours.Versions with short or ...
WingGrip connectors or wire splices with industry standard ...
Description:
WingGrip connectors or wire splices with industry standard colour coding for wire sizes 18 AWG to 6 AWG. The twist-on splices have square-wire spring threads which provide a positive grip, moulded 'wings' to enable a secure connection. Made from UL ...