RS PRO Closed End Wire Splice Connector, Clear, Insulated, Tin Plated 1 2.6 mm²

Wetgeving en compliance
Land van herkomst: TW

RS Pro Closed End Crimp Connectors

From RS PRO an insulated closed end crimp connector is a type of crimp terminal designed for the quick and easy joining or splicing of two or more electrical wires to form a permanent and reliable solderless connection. This RS PRO closed end connector is professionally designed using high-quality materials, with a tin plated copper barrel and a durable transparent nylon sleeving. The nylon sleeving has a flared entry design for easy insertion of your wires avoiding any turned back strands.

How do you use a Closed-End Wire Connector?

RS PRO nylon closed end connectors are easy to terminate. Simply strip the wires that need joining and insert them into the barrel of the connector and crimp together using a suitable crimper. The correct sized crimp connector can be calculated by adding all conductor cross-sectional areas together (mm²). The compression style electrical connection provides good tensile strength while maintaining maximum contact with the wire. The RS PRO series of closed end wire terminals are an essential addition to any electrician’s tool kit.

Features and Benefits

• Tin plated copper tube
• Durable nylon insulation
• Flared entry design for quick and easy wire insertion
• Durable and reliable termination
• Cost effective
• Easy to crimp using a ratchet tool.


These closed end wire connectors are used in a wide range of industrial, commercial and domestic applications for joining electrical wires in wiring harnesses or insulating the ends of spare wires which may be required at a later date. They can be found almost anywhere where an electrical connection is required. Some of the most common are:

• Industrial control systems
• Automotive and transportation sector
• Machine building
• Electrical and electronic equipment
• Commercial and domestic appliances

Suitable Crimp Tooling

For a suitable crimp tool to use with these closed end connectors please see stock no. 253-4583.



Kenmerk Waarde
Minimum Wire Size mm² 1.5mm²
Wire Size 1 2.6 mm²
Overall Length 21mm
Maximum Wire Size mm² 2.5mm²
Diameter 7.4mm
Minimum Wire Size AWG 16AWG
Maximum Wire Size AWG 14AWG
Insulation Insulated
Insulation Material Nylon
Shrouded/Unshrouded Shrouded
Contact Material Copper
Contact Plating Tin
Colour Clear
1900 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
8100 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
€ 0,129
€ 12,90
500 - 2400
€ 0,11
€ 11,00
2500 - 4900
€ 0,097
€ 9,70
5000 - 9900
€ 0,084
€ 8,40
10000 +
€ 0,071
€ 7,10
Related Products
A range of heavy duty copper butt splice ...
A range of heavy duty copper butt splice crimp terminals manufactured from a pure grade copper base to BS2871 and electro-tin plated to BS1872,1984. These HD copper butt splice crimp terminals are for use on multi-stranded cables and are available ...
Quick Splice IDC wire splice connectors made from ...
Quick Splice IDC wire splice connectors made from brass with a colour coded nylon insulation. These Quick Splices provide a simple and time saving wire connection method. The splice is simply placed over the existing wire, the additional wire inserted ...
TE heat shrinkable pre-insulated nylon splices and crimp ...
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion ...
PLASTI-GRIP closed barrel parallel splice wire crimp terminals ...
PLASTI-GRIP closed barrel parallel splice wire crimp terminals made of high conductivity tin plated copper with an expanded high dielectric strength 94V-0 rated vinyl insulation sleeve. The inner barrel of these PLASTI-GRIP parallel splice crimp terminals is serrated in order ...