166722-1 TE Connectivity AMPMODU Tandem Spring Female Crimp Terminal Contact 20AWG

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity AMPMODU MTE Contacts and Extraction/Lance Reset Tool

AMPMODU MTE interchangebale wire crimp (snap-in) contacts for use in AMPMODU MTE unloaded housings. These AMPMODU MTE IDC contacts have a standard applied pressure and are made from phosphor bronze with a choice of platings and wire size ranges.
Stock numbers 452-599 and 864-3620 are extraction/lance reset tools for removing contacts from the housings and resetting the depressed contact locking lances of the removed contact. Stock number 452-599 has a tip height of 0.46mm, stock number 864-3620 has a tip height of 1.02mm. Both tools have a 0.81mm tip width and a 21° lance reset angle.

TE Connectivity AMPMODU MTE Interconnection System

AMPMODU MTE 2.54 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTE connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the need for wire stripping saving both time and cost. Using production hand tooling these MTE IDC connectors can be quickly assembled to discrete wire. The AMPMODU MTE connector system consists of single row receptacle housings preloaded with IDC contacts and PCB headers. Coupling shrouds are also available which allow the ganging of connectors to form larger single row or double row connectors

Specificaties
Kenmerk Waarde
Gender Female
For Use With AMPMODU MOD IV Connector Housing
Series AMPMODU Tandem Spring
Minimum Wire Size mm² 0.2mm²
Maximum Wire Size mm² 0.5mm²
Termination Method Crimp
Minimum Wire Size AWG 24AWG
Contact Plating Gold
Contact Material Phosphor Bronze
Maximum Wire Size AWG 20AWG
Maximum Contact Resistance 12mΩ
Minimum Operating Temperature -65°C
Maximum Operating Temperature +105°C
23400 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Bag of 200)
0,314
(excl. BTW)
0,38
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
200 - 800
€ 0,314
€ 62,80
1000 - 1800
€ 0,224
€ 44,80
2000 +
€ 0,213
€ 42,60
*prijsindicatie
Related Products
Mini-PV series crimp receptacle contacts for connecting discrete ...
Description:
Mini-PV series crimp receptacle contacts for connecting discrete wire to a PCB. These PV receptacle contacts can be crimped to wire and used discretely or inserted into a MINI-LATCH crimp connector housing. These high reliability crimp receptacles are made from ...
MCP 2.8 standard receptacle timer contacts (SRC) made ...
Description:
MCP 2.8 standard receptacle timer contacts (SRC) made from CuNiSi (Copper Nickel Silicon) with stainless steel top springs. These MCP 2.8 standard receptacle timer contacts have a mating interface area of 2.79 x 0.81mm and can also be used with ...
AMPMODU self retaining locking clip crimp contacts for ...
Description:
AMPMODU self retaining locking clip crimp contacts for a permanent connection with quick connect and disconnect. These locking clip wire crimp contacts have insulation support, stainless steel springs and 3 plating options.
A range of Receptacle Crimp Contacts for use ...
Description:
A range of Receptacle Crimp Contacts for use with Mod IV shells which mate with shrouded headers. This range includes Crimps are for 32-28 or 26-22 or 24-20 AWG wires, see Table for details.