Molex C-Grid III Series Female Crimp Terminal, 24AWG Min, 22AWG Max

C-Grid III 90119 series female crimp terminals for use in C-Grid III 90156, 90123, 90142, 90143 and 90160 series crimp housings. These C-Grid III crimp receptacles terminals have a box design and a uniform locking system that enables them to be used inside different housing styles. The contacts are made from phosphor bronze with a choice of gold or tin plating and suitable for use with wire size ranges of 24-22 AWG or 28-26 AWG.
For suitable crimp tools see stock number 781-2728 for 24-22 AWG terminals and 781-2737 for 28-26 AWG terminals. An extraction tool (stock number 360-6897) and an insertion tool (stock number 360-6881) are also available.

• Current Rating: 3A max
• Working Voltage: 350 Vac/dc max
• Contact Plating: Selective Gold over Nickel or Tin over Nickel
• Insulation Material Headers: 15% Glass-filled Polyester (PBT)
• Housing: Polyphenylene Oxide
• Header Pin Size: 0.64 square mm
• Recommended PCB Hole Diameter: 1mm

• Consumer Electronics
• Commercial Vehicles

This crimp contact from Molex conducts electrical current to a PCB (printed circuit board). It features a box design and uniform locking system that's compatible with a variety of housings. The phosphor-bronze contact material is gold-plated so it won't corrode and provides excellent conductivity. This is a female connector that fits wire sizes ranging from 22 to 24AWG (American Wire Gauge) and offers a high voltage capacity for either alternating or direct currents (AC/DC).

• Crimp termination method provides dependable, gas-tight connections that avoid alloys for greater strength
• Complies with EU environmental and safety standards
• Reduced risk of toxic fumes in case of fire due to low halogen content
• For use with C-Grid III connector housings

• Consumer electronics
• Commercial vehicles

Soldering involves heating a filler metal alloy of lead, tin, brass or silver to join cable and connector together. Over time, this filler metal can degrade and cause a loss of reliability. A crimp connector is faster and uses pressure to create an air-tight seal and a stronger, more dependable connection that will last.

DIN 41651; HE13/14

2.54mm Molex C-Grid III Range