TE Connectivity PLASTI-GRIP Series Insulated Tin Plated Crimp Pin Connector, 3mm² to 6mm², 12AWG to 10AWG

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

TE Connectivity PLASTI-GRIP Wire Pin Crimp Terminals

PLASTI-GRIP wire pin crimp terminals made of high conductivity tin plated copper with an expanded high dielectric strength 94V-0 rated vinyl insulation sleeve. The inner barrel of these PLASTI-GRIP crimp pin terminals is serrated in order to provide maximum electrical contact and tensile strength after crimping. The funnelled entry on the wire barrel enables the stripped wire to be inserted more easily.

Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²

Note

Not for use with double wire

TE Connectivity Crimp Pin Connector

The TE Connectivity insulated yellow-coloured crimp pin connector belongs to the PLASTI-GRIP series. This crimp pin connector is solderless electrical connection used to terminate a stranded wire by inserting the stripped end of the wire into a part of the terminal. Inside the barrel are serrations which provide maximum contact and tensile strength after crimping.

Features and Benefits

• Available in different colour-coded covers for easy wire size and tooling identification
• Barrel type is a close barrel
• Design enables a reliable and uniform crimp
• Funnelled wire entry for easy wire insertion
• It is made from high conductivity tin-plated copper with high dielectric strength
• Operation temperature ranges between -25°C and 90°C
• Overall length is 29.41mm
• PVC is used as an insulating material
• Wire size is in between 10AWG and 12AWG

Applications

• Motors
• Lifting equipment
• Aerospace
• Transportation
• Lighting
• Panel boxes
• Power supply instruments

TE Connectivity Plasti-Grip Terminals

Temperature range: PVC -25°C to +90°C
  Nylon -55°C to +105°C
Termination material: Tin plated Copper  
Termination insulation: Rings, spades, wire pins  
  6.35mm blades, splices PVC
  6.35mm receptacles Nylon 6.6
  (including shrouded)  
Specificaties
Kenmerk Waarde
Series PLASTI-GRIP
Insulation Insulated
Insulation Material PVC
Minimum Wire Size mm² 3mm²
Maximum Wire Size mm² 6mm²
Overall Length 29.41mm
Minimum Wire Size AWG 12AWG
Maximum Wire Size AWG 10AWG
Pin Diameter 2.6mm
Colour Yellow
Contact Plating Tin
2500 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Box of 500)
0,823
(excl. BTW)
0,996
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
500 +
€ 0,823
€ 411,50
*prijsindicatie
Related Products
PLASTI-GRIP blade wire crimp terminals made of high ...
Description:
PLASTI-GRIP blade wire crimp terminals made of high conductivity tin plated copper with an expanded high dielectric strength 94V-0 rated vinyl insulation sleeve. The inner barrel of these PLASTI-GRIP blade crimp terminals is serrated in order to provide maximum electrical ...
PLASTI-GRIP wire pin crimp terminals made of high ...
Description:
PLASTI-GRIP wire pin crimp terminals made of high conductivity tin plated copper with an expanded high dielectric strength 94V-0 rated vinyl insulation sleeve. The inner barrel of these PLASTI-GRIP crimp pin terminals is serrated in order to provide maximum electrical ...
PLASTI-GRIP wire pin crimp terminals made of high ...
Description:
PLASTI-GRIP wire pin crimp terminals made of high conductivity tin plated copper with an expanded high dielectric strength 94V-0 rated vinyl insulation sleeve. The inner barrel of these PLASTI-GRIP crimp pin terminals is serrated in order to provide maximum electrical ...
PLASTI-GRIP closed barrel ring tongue wire crimp terminals ...
Description:
PLASTI-GRIP closed barrel ring tongue wire crimp terminals made of high conductivity tin plated copper with an expanded high dielectric strength 94V-0 rated vinyl insulation sleeve. The inner barrel of these PLASTI-GRIP closed barrel ring tongue crimp terminals is serrated ...