Klauke L Series, Crimp Die Set, Tubular Cable Lug, Wire size 150 mm²

  • RS-stocknr. 771-9253
  • Fabrikantnummer HL4150
  • Fabrikant Klauke
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Battery Operated Hydraulic Crimp Tool

From Klauke, a professional quality battery operated crimp tool for heavy duty uninsulated terminals within the wire range 6mm² to 95mm². The head is fully rotatable over 360°, offering versatility in awkward or confined spaces. Dies are automatically extracted after the crimp cycle, with a manual extraction facility provided. This range also includes a selection of appropriate dies and replacement battery.

Features and Benefits:
• An ergonomic design that also permits one-handed operation
• Battery may be fast charged in 40 minutes
• Tool is supplied with charger and battery in a strong carry case
• Carry case has internal compartments to contain die sets
• Die sets in the range 6mm² to 95mm² are available separately, as are replacement batteries and chargers
• The Crimping cycle is 4 seconds
• A Battery Capacity of 2Ah
• Provides approx. 85 Crimping Cycles per Charge
• Weight including battery is 1.6kg

Note

For compatible uninsulated terminals see stock number 531-043 (typical of range).
For appropriate battery see stock number 459-6145.

Specificaties
Kenmerk Waarde
Crimp Connector Type Tubular Cable Lug
Wire Size 150 mm²
Series L
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
103,61
(excl. BTW)
125,37
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 103,61
5 - 24
€ 90,58
25 +
€ 84,92
Related Products
The die sets are available to cover the ...
Description:
The die sets are available to cover the cable range 10, 16, 25, 35, 50 and 70mm². The associated hydraulic crimper tool comes complete in a moulded plastic carry case which has provision for the die sets (see stock number ...
Hand crimping tools for crimping MC4-Evo2 series crimp ...
Description:
Hand crimping tools for crimping MC4-Evo2 series crimp contacts onto conductors. These hand crimping tools easily and safely provide a high quality crimp onto conductors with a wire size range of 4-6 mm2. For conductors with a larger 10mm2 wire ...
A Semi-professional ratchet hand tool for crimping shield ...
Description:
A Semi-professional ratchet hand tool for crimping shield rings / ferrules of shielded Bel Stewart connectors. See part number 290-4780 typically. The ferrule die sets are easily changed to suit individual cable diameters. Die sets for 5.2 mm and 6.0 ...
A range of crimp dies for the Pressmaster ...
Description:
A range of crimp dies for the Pressmaster MCT Mobile Crimp Tool (stock number 492-9595). These MCT crimp tool dies are available for a variety of connector types including coaxial, RJ networking, automotive and timer.