Bel-Stewart Plier Crimping Tool for RJ45 Cat 6 Shielded Plug

  • RS-stocknr. 413-415
  • Fabrikantnummer 2980075-01
  • Fabrikant Bel-Stewart
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Cat 6 Shielded Termination Tool Kit

The Bell Stewart 2980075-01 is a high-quality tool designed for professionals and serious DIY enthusiast. Made from the best quality materials offer a long life and hassle-free operation. This Professional hand tool has been designed for the assembly of shielded Cat 6 plugs. It features a parallel action, full cycling, ratchet crimp action with a manual release. Also, the thumbscrew allows for a quick and easy die changes.

Features and Benefits:
• A highly durable hand tool designed for professional use
• Made from high-quality, lightweight materials. Weights only 460 g
• Compact size (210 mm x 60 mm)
• One-Step function allow contacts and shield to be crimped at the same time

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies

FAQ's:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

Specificaties
Kenmerk Waarde
Crimp Connector Type RJ45 Cat 6 Shielded Plug
Crimp Tool Type Plier
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
333,21
(excl. BTW)
403,18
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 333,21
5 +
€ 324,66
Related Products
Multi component grip handle crimp lever tool with ...
Description:
Multi component grip handle crimp lever tool with 4 crimp positions. For use with non-insulated open plug type connectors (plug width 2.8 + 4.8 mm). Short crimp lever toolsConsistently high crimp quality enabled by a precision profile and automatic lock ...
RS Pro crimp tool, designed for crimping bootlace ...
Description:
RS Pro crimp tool, designed for crimping bootlace ferrules. This professional tool offers wire range size of 0.5 16 mm2 with clear identifying marks on the head heads of the tool. A plier shape design and superb comfort in both ...
RJ45 low-profile shielded male plugs, with or without ...
Description:
RJ45 low-profile shielded male plugs, with or without sleeve.360° shielding ensures optimum protection against interference.Two acceptable cable diameters: 5.4 mm and 6mm.The crimp tools and the grips should be ordered separately.
High quality Knipex crimping tool for modular plugs. ...
Description:
High quality Knipex crimping tool for modular plugs. This handheld crimp tool is designed for cutting and stripping unshielded ribbon telephone cables. For crimping RJ 11/12 (6 poles) 9.65mm and RJ 45 (8 poles) 11.68mm modular plugs and exact crimping ...