Glenair M22520/5-01 Ratchet Crimping Tool

  • RS-stocknr. 425-6156
  • Fabrikantnummer HX4
  • Fabrikant Glenair
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: US
Productomschrijving

HX4 Crimp Tool Die Sets

The proven HX4 (M22520/5-01) ratchet crimp tool frame with interchangeable coaxial connector crimp die sets, eliminates the need for separate dedicated crimp tools. Crimp dies are snapped into the frame and retained with internal spring clips.

A selection of dies are available separately to accommodate most coaxial contacts conforming to MIL-C-39012, MIL-C-39029 and numerous proprietary configurations. Die set 425-6162 is designed specifically to terminate BT2003 RS crimp plugs and jacks for cable group H
Operating instructions and die remover included with tool frame

Note

Users should take care when selecting tooling to confirm that the die set aperture dimensions are compatible with the connector being used, and that the cable type is also compatible.

General Support Tooling

The crimp tooling detailed on this and subsequent pages are recommended, in most cases, for a wide range of connectors and associated cable types. The 'Crimp Tool Selection Guide' table indicates the cable type(s) and/or specific type(s) of connector for which each tool is recommended. The 'Die Set Selection Guide' table indicates compatible cable types and their 'Group number' and details of frame tool required. A small number of crimp tools have been considered to be 'dedicated' to a connector type. These tools have been incorporated with those connector ranges on respective pages, and are not included within this General Tooling Range.

Specificaties
Kenmerk Waarde
Series M22520/5-01
Crimp Tool Type Ratchet
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
462,78
(excl. BTW)
559,96
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 462,78
Related Products
From Klauke, a professional quality battery operated crimp ...
Description:
From Klauke, a professional quality battery operated crimp tool for heavy duty uninsulated terminals within the wire range 6mm² to 95mm². The head is fully rotatable over 360°, offering versatility in awkward or confined spaces. Dies are automatically extracted after ...
A universal crimp tool frame with die sets ...
Description:
A universal crimp tool frame with die sets available separately for terminating AMP and Western Electric Style data plugs.Tool frame: (stock number 443-895) A ratchet action crimp tool frame with ratchet release and finger operated set screws for rapid location ...
Hand crimping tools for crimping MC4-Evo2 series crimp ...
Description:
Hand crimping tools for crimping MC4-Evo2 series crimp contacts onto conductors. These hand crimping tools easily and safely provide a high quality crimp onto conductors with a wire size range of 4-6 mm2. For conductors with a larger 10mm2 wire ...
A Semi-professional ratchet hand tool for crimping shield ...
Description:
A Semi-professional ratchet hand tool for crimping shield rings / ferrules of shielded Bel Stewart connectors. See part number 290-4780 typically. The ferrule die sets are easily changed to suit individual cable diameters. Die sets for 5.2 mm and 6.0 ...