Molex Ratchet Crimping Tool

  • RS-stocknr. 778-6704
  • Fabrikantnummer 63811-6200
  • Fabrikant Molex
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

MX150L and MX150 Terminal Tooling

This range of Molex Hand Crimp tools are suitable for MX150 and MX150L Sealed Rectangular Connector (SRC) system contacts. A full cycle with ratcheting action for a complete crimp is provide by these T9999 Series hand tools. The Type 4A Crimper has an ergonomic handle design with simple contact positioning.

Note

For applicable MX150L contacts see stock number 511-0017 typical.
For applicable MX150 contacts see stock number 720-5710 for female and 720-5700 for male typical.

Molex MX150L Sealed Connector System

Rugged, environmentally sealed connector system tested to IEC IP 67 that supports both low level signal and power applications up to 18 amps. Applications include: automotive, industrial control, video surveillance, outdoor lighting and machine tools.

Connector housings and seals pre-assembled
2 to 10 Circuit
IP67 rated
Integral Locking Latch
14-16 and 18-22 AWG options

Specificaties
Kenmerk Waarde
Crimp Tool Type Ratchet
Overall Length 150mm
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
371,34
(excl. BTW)
449,32
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 371,34
Related Products
From JST, a parallel action hand tool for ...
Description:
From JST, a parallel action hand tool for the HCH automotive female contacts. The ergonomically designed crimp tool features a flap locator ensuring the correct position of the contact during crimping. The tool has two cavities to suit wire sizes ...
Hand Crimp Tool for Squba Plug and Receptacle ...
Description:
Hand Crimp Tool for Squba Plug and Receptacle Crimp Terminals, 22-24 AWG. A full cycle ratcheting hand tool ensures complete crimps Ergonomically designed soft handles Precisely designed crimping profiles with simple contact positioning Easy handling due to outstanding force ratio ...
A Semi-professional ratchet hand tool for crimping shield ...
Description:
A Semi-professional ratchet hand tool for crimping shield rings / ferrules of shielded Bel Stewart connectors. See part number 290-4780 typically. The ferrule die sets are easily changed to suit individual cable diameters. Die sets for 5.2 mm and 6.0 ...
The Pressmaster range of Komfort tools are ergonomically ...
Description:
The Pressmaster range of Komfort tools are ergonomically designed to give maximum comfort with the minimum hand pressure required for reliable and repeatable crimping. They all feature the Komfort frame design which has been specifically designed to reduce the amount ...