Fluke Fluke 710 Multi Function Calibrator 30V dc 24mA

  • RS-stocknr. 181-2322
  • Fabrikantnummer FLUKE-710
  • Fabrikant Fluke
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Smart Control Valve Testing is now easier than ever:The Fluke 710 Valve Testing Loop Calibrator is designed to enable users to perform quick, easy tests on HART smart control valves. Featuring built-in test procedures and an intuitive user interface, the 710 allows users to quickly and easily perform valve tests, while the valve test quick-check results provide at-a-glance diagnostics help you make maintenance decisions faster than ever. The valve health quick-check results let you know whether your valve is in good, marginal or in bad operating condition so you can quickly decide whether additional maintenance is necessary. Valve testing and HART communication in a precision loop calibrator:With the 710 Valve Testing Loop Calibrators built in HART communication function, users can source a 4-20 mA signal to cause the smart control valve to move, while simultaneously interpreting the valves HART feedback signal to determine whether the valve is moving to the expected position. In addition to positional information, the measured pressure delivered from the valves internal I/P (which moves the valve) can be determined through the HART communication protocol. The 710 has built-in test procedures that automatically increase and change the mA signal while monitoring the HART position and pressure feedback from the control valve, giving you a better overall picture of valve health at the simple push of a button

Key valve testing functions include pre-configured valve signature test, speed test, step test, manual test, and bump/partial stroke testKey mA loop calibrator functions include mA source, mA simulate, mA read, mA read/loop power, and volts readValveTrack™ Software enables upload to a PC for further in-depth analysis of valve measurements that are logged and recorded to memory.

Specificaties
Kenmerk Waarde
Battery Type AAA
Battery Life 40 h
Power Source Battery
Dimensions 150 x 90 x 30mm
Weight 300g
Height 30mm
Length 150mm
Maximum Operating Temperature +55°C
Minimum Operating Temperature -10°C
Width 90mm
Model Number p Fluke 710
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
2.209,00
(excl. BTW)
2.672,89
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 2.209,00
Related Products
This instrument allows the process engineer to simulate ...
Description:
This instrument allows the process engineer to simulate sensor conditions at the input of a transmitter while simultaneously measuring and storing the resulting signal output. Integral memory allows popular calibration procedures to be stored for transmitter testing in the field; ...
DPI 620 GENII IS is Druck's next-generation instrument ...
Description:
DPI 620 GENII IS is Druck's next-generation instrument for calibration, configuration and maintenance of electrical, frequency, pressure and temperature devices in measurement and control applications. It can measure and source a wide range of parameters simultaneously including mA, mV, V, ...
Take along the Fluke 725 Multifunction Process Calibrator, ...
Description:
Take along the Fluke 725 Multifunction Process Calibrator, and you're equipped to test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. Do you need to ...
Fluke 725EX Multi-Function Process Calibrator ATEX with high ...
Description:
Fluke 725EX Multi-Function Process Calibrator ATEX with high performance. Small, streamlined shape makes it easy to carryEasy to read measure/source screen lets you view input and output simultaneouslyMeasure mA, volts, RTDs, thermocouples, frequency and ohms to test sensors and transmittersSource/simulate ...