Pico Technology TA326 Current Probe

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Pico TA326 30/300/3000A AC Flex Current Probe with BNC Connector

The TA326 is an AC current probe utilising the Rogowski coil principle, used to measure AC current up to 3000 A when used with oscilloscopes, recorders or data loggers. The flexible probe allows current measurements on hard-to-reach conductors. Rogowski coil technology has a couple of advantages over CT (current transformer) technology: when measuring multiple phases, the phase difference is small and predictable for higher frequency harmonic analysis applications; also, Rogowski coils do not have magnetic materials to saturate and so have excellent linearity.
The probe has three user selectable ranges; 30 A, 300 A and 3000 A.​The probes provide a 3 V full-scale AC output proportional to the current being measured with three selectable ranges.

Features and Benefits

1000 V RMS, Category III, 600 V RMS, Category IV Pollution Degree 2 (probe and integrator)
30 V maximum between output and ground
RoHS and WEEE compliant
Rated for continuous use

Pico PC Based Instruments

Specificaties
Kenmerk Waarde
Current 3000A
Probe Type AC
Minimum Bandwidth 10Hz
Maximum Bandwidth 20kHz
Safety Category CAT III 1000 Vrms, CAT IV 600 Vrms
Series TA300
Safety Category Level CAT III, CAT IV
Model Number p TA326
Best Accuracy ±1 %
Safety Category Voltage 600 Vrms, 1000 Vrms
Bandwidth 20kHz
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
309,00
(excl. BTW)
373,89
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 309,00
Related Products
Dual range a.c. current clamp nominal measuring ranges ...
Description:
Dual range a.c. current clamp nominal measuring ranges 0.1A to 20A a.c. and 0.5A to 200A a.c.Safe, non intrusive current measurement40Hz to 10kHz bandwidthErgonomic jaw design for measurement where access is difficult and allows 'hooking' onto the cableMax. conductor size ...
Various bandwidths: DC to 50 MHz, 100 kHzDC ...
Description:
Various bandwidths: DC to 50 MHz, 100 kHzDC and AC measurementsSuperior accuracy and high signal to-noise ratioLow circuit insertion lossBattery powered with BNC connector or oscilloscope powered AutoProbe interface.
Tektronix current probes include: TCP0020 ( 796-2696 ); ...
Description:
Tektronix current probes include: TCP0020 ( 796-2696 ); TCP2020 ( 796-6705 ); TCP202A ( 796-2687 ). Their applications cover power supplies, semiconductor devices, power inverters/converters, electronic ballasts, industrial/consumer electronics, mobile communications, motor drives and transportation systems. Easy ...
The D30N current clamp provides true RMS measurement ...
Description:
The D30N current clamp provides true RMS measurement values and faithful signal reproduction. The rectangular jaws can be used to clamp large-diameter cables or busbars.This current clamp may also be used with multimeters, harmonic and power measurement equipment, logging apparatus ...