MPS MCS1800GS-12-P, Hall Effect Sensor IC 8-Pin, SOIC-8
- RS-stocknr.:
- 337-954P
- Fabrikantnummer:
- MCS1800GS-12-P
- Fabrikant:
- MPS
Bulkkorting beschikbaar
Subtotaal 50 eenheden (geleverd op een doorlopende strip)*
€ 128,00
(excl. BTW)
€ 155,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 19 februari 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 50 - 95 | € 2,56 |
| 100 + | € 2,374 |
*prijsindicatie
- RS-stocknr.:
- 337-954P
- Fabrikantnummer:
- MCS1800GS-12-P
- Fabrikant:
- MPS
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | MPS | |
| Offset Voltage | ±10 mV | |
| Product Type | Hall Effect Sensor IC | |
| Bandwidth | 100kHz | |
| Current Rating | 12.5 A | |
| Package Type | SOIC-8 | |
| Pin Count | 8 | |
| Mount Type | Surface Mount | |
| Minimum Supply Voltage | 0.1V | |
| Maximum Supply Voltage | 6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Length | 6.2mm | |
| Series | MCS1800 | |
| Width | 4.8 mm | |
| Height | 1.75mm | |
| Standards/Approvals | RoHS | |
| Alles selecteren | ||
|---|---|---|
Merk MPS | ||
Offset Voltage ±10 mV | ||
Product Type Hall Effect Sensor IC | ||
Bandwidth 100kHz | ||
Current Rating 12.5 A | ||
Package Type SOIC-8 | ||
Pin Count 8 | ||
Mount Type Surface Mount | ||
Minimum Supply Voltage 0.1V | ||
Maximum Supply Voltage 6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Length 6.2mm | ||
Series MCS1800 | ||
Width 4.8 mm | ||
Height 1.75mm | ||
Standards/Approvals RoHS | ||
- Land van herkomst:
- CN
The MPS International Ltd Linear Hall effect current sensor for AC or DC current sensing. The Hall array is differential, which cancels out any stray magnetic field. A primary conductor with a low resistance allows current to flow close to the IC, which contains high accuracy Hall effect sensors. This current generates a magnetic field that is sensed at two different points by the integrated Hall effect transducers. The magnetic field difference between these two points is then converted into a voltage that is proportional to the applied current.
4μs output rising time
Ratiometric output from supply voltage
Output proportional to AC or DC currents
Factory trimmed for accuracy
No magnetic hysteresis