Infineon IR2175SPBF, Current Sensor

  • RS-stocknr. 124-8780
  • Fabrikantnummer IR2175SPBF
  • Fabrikant Infineon
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MY
Productomschrijving

Current Sensing Amplifiers, Infineon

Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.

Specificaties
Kenmerk Waarde
Offset Voltage 600V
Quiescent Current 2mA
Package Type SOIC
Pin Count 8
Mounting Type Surface Mount
Dimensions 5 x 4 x 1.5mm
Maximum Input Voltage 0.26 V
Minimum Input Voltage -260 mV
Product Height 1.5mm
Product Length 5mm
Product Width 4mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 19-03-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tube of 95)
2,068
(excl. BTW)
2,502
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
95 - 380
€ 2,068
€ 196,46
475 - 855
€ 1,695
€ 161,025
950 +
€ 1,525
€ 144,875
*prijsindicatie
Related Products
The Allegro high current sensor IC packages are ...
Description:
The Allegro high current sensor IC packages are fully integrated current sensor solutions that provide high accuracy and reliability. These sensors are automotive-grade devices that can take the heat and deliver highly accurate open-loop current sensing in the most harsh ...
The Allegro™ ACS730 current sensor family provides economical ...
Description:
The Allegro™ ACS730 current sensor family provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection ...
The PAC1934 is a four channel power/energy monitor ...
Description:
The PAC1934 is a four channel power/energy monitor with current sensor amplifier and bus voltage monitors that feed high resolution ADCs. Digital circuitry performs power calculations and energy accumulation. The PAC1934 enables energy monitoring with integration periods from 1 ms ...
The PAC1933 is a three-channel power monitor and ...
Description:
The PAC1933 is a three-channel power monitor and energy monitor that reports on bus voltage and sense voltage 16-bits of resolution. Power is reported as a simultaneous product of two 16-bit independent bus and sense voltages. All registers are accessible ...