Erem by Weller 135 mm Cutters, Tool Steel

  • RS-stocknr. 182-313
  • Fabrikantnummer 2482E
  • Fabrikant Weller Erem
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CH
Productomschrijving

Weller 2482E Angled Cutters

The 2482E angled tipped cutters from Weller provide precise cuts at a number of angles. The ergonomic handles allow for reduced fatigue in hands when working over long periods. Made from tough and durable tool steel that makes it suitable for working on electronic boards, component connections due to the ESD protection. The 45° cutting angle coupled with a maximum cutting capacity of 1.2 mm for copper wire and 0.6 for medium hardness wire

Features and Benefits

• Protection of electronic components from risks of electrostatic discharge (ESD)

• ESD compliant for safe use on sensitive electronic components

• Spring return system reduces effort and strain

• Angled Narrow Head Cutters

• Overall length: 135mm

• Cuts copper and Nickel wires Ø: 0.1 – 1.2mm

• Weight: 72g

Typical Applications

Cutters are hand tools used to cut through wires and are available in a range of shapes and sizes to suit a variety of tasks and applications. The most common type of cutter head is oval, tapered and angled. The type of cut produced depends on the bevel of the cutter. Semi-flush cutters are more durable and produce a quick cut rough rougher edges, whereas an ultra-flush bevel will produce a much cleaner cut but is susceptible to damage. Cutters are commonly used in applications such as:

• DIY
• Industrial
• Construction
• Electronic Installation

Care and maintenance

Do not force cutters to cut through material that is too hard for them as it can damage the blades by chipping or blunting them. These hand tools can be cleaned with soap and water, especially the blades, to remove dirt which could cause issues with the joints and encourage corrosion.

FAQ's

What material is this cutter suitable with?

This cutter is suitable to cut copper wires 0.1 to 1.2mm.

What is the bevel of this cutter?

The 2482E provides a flush cut at 45°.

Specificaties
Kenmerk Waarde
Type Electronics Diagonal Cutters
Overall Length 135 mm
Jaw Length 6mm
ESD Safe Yes
Material Tool Steel
Maximum Cutting Capacity 1.2mm
Cutting Capacity Medium Hard Wire 0.6mm
Cutting Capacity Copper Wire 1.2mm
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
24 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
70,00
(excl. BTW)
84,70
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 70,00
Related Products
High-quality diagonal cutting pliers with angled head for ...
Description:
High-quality diagonal cutting pliers with angled head for flush cuts. Manufactured from heat treated high chrome steel, with interlocking joint assembly for smooth cutting. Fitted with bi-material handles for a more comfortable controlled grip. Ideal for electronics work, cutting tempered ...
Professional hand BiCut industrial cutters with diagonal blade. ...
Description:
Professional hand BiCut industrial cutters with diagonal blade. These clever high-performance cutting pliers give you twice the cutting force compared to that of standard pliers, using little hand strength. Featuring the ability to do the job of two pairs of ...
VDE Insulated diagonal cutters designed for professionals working ...
Description:
VDE Insulated diagonal cutters designed for professionals working with electrical components. These professional BiCut industrial cutting pliers, give you twice the cutting force compared to that of standard pliers, using little hand strength. Featuring the ability to do the job ...
Tool burnished, handles with multi-component grips. Compact, light ...
Description:
Tool burnished, handles with multi-component grips. Compact, light and powerfulUp to 30 % less physical effort compared to wire rope cutters of the same lengthDouble-mounted box joint design for high level of stabilityCutting edges additionally induction hardened, cutting edge hardness ...