Phoenix Contact SH Series 2.77mm Pitch 15 Way Right Angle Male Screw Terminal D-sub Connector

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Phoenix Contact SUBCOM Screw Terminal D-Sub Connectors

SUBCON 15/M-SH

A 15 position, male D-SUB Bus connector from Phoenix Contact that is easy to assemble due to the knurled screws. Designed for universal use, the D-SUB position can be changed through a reversible connection block.

Features and Benefits

• High level of EMC
• One cable entry
• Assemble easily under field conditions
• PCB mounting
• IP20
• Operating temperature of -20°C to +75°C

BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Specificaties
Kenmerk Waarde
Gender Male
Number of Contacts 15
Body Orientation Right Angle
Pitch 2.77mm
Contact Material Copper Alloy
Housing Material ABS
Current Rating 100mA
Voltage Rating 50 V
Dimensions 64.7 x 16 x 44.5mm
Mounting Type PCB Mount
Series SH
Depth 44.5mm
Maximum Operating Temperature +75°C
Length 64.7mm
Minimum Operating Temperature -20°C
Width 16mm
41 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
37 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
46,56
(excl. BTW)
56,34
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 46,56
15 - 49
€ 44,19
50 - 99
€ 42,00
100 - 249
€ 39,90
250 +
€ 37,90
Related Products
Suitable for crimp or solder termination contacts, see ...
Description:
Suitable for crimp or solder termination contacts, see stock no's 719-5824 and 719-5833 typicallyThese connector shells offer the possibility of assembly and re-assembly with either crimp or solder contactsHigh quality, crimp and poke or solder and poke connectors in standard ...
Professional range of Phoenix Contact D-Sub connectors and ...
Description:
Professional range of Phoenix Contact D-Sub connectors and accessories from the VS series. Various accessories include mouting frames, cap nuts and protective covers. Crimp or Solder pinsVarious positions available.
Dual port d-subs available in 4 industry sizes/positions:Standard ...
Description:
Dual port d-subs available in 4 industry sizes/positions:Standard Density (9 pin, 15 pin, 25 pin, 37 pin) & High Density (15 pin)Low cost, high performance stamped contacts.Stacked d-sub provides proper mating while maximizing board space.Nickel plated shells have ground indents ...
Board locks with integral earthing straps can reduce ...
Description:
Board locks with integral earthing straps can reduce costs during PCB solderingTinned/dimpled shells for effective shieldingSealed back prevents solder/flux ingress4-40 UNC inserts are incorporatedSuitable locking screws stock no. 453-886.