FCT - A MOLEX COMPANY FMK Series Die Cast Zinc D-sub Connector Backshell, 15 Way, Strain Relief

  • RS-stocknr. 291-6193
  • Fabrikantnummer FMK2G / 1727040098
  • Fabrikant FCT
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

FMK Series Metal Hoods, Straight and Angled 45°

These FMK Series Metal Hood Backshells have a Large Inner Chamber and an Angled or Straight Cable Outlet. This large amount of internal space is particularly suitable for D-sub connectors with special contacts. The design of the FMK Series Metal Hood Backshell includes strain relief on the cable outlet. The FMK Series Metal Hood Backshell is easy to assemble thanks to the catch spring system and pre-mounted locking screws. The FMK Series Metal Hood Backshells can be used with engagement hooks and locking or knurled screws.

FMKx: Angled
FMKxG: Straight
FMKxx-K201: Large Cable Outlet
FMKx-4881: Dual Cable Outlet

Note

Stock number 764-9668 has dual cable (Ø8 → 12 mm) entry slot

Approvals

UL E168813

Warning

  • Stock no. 291-6288 is supplied without anti-kink feature
Specificaties
Kenmerk Waarde
Number of Contacts 15
D-Sub Shell Size A
Housing Material Die Cast Zinc
Body Orientation Straight
Colour Silver
Housing Material Plating Nickel
Strain Relief Yes
Series FMK
1536 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
352 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
6,16
(excl. BTW)
7,45
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 6,16
25 - 99
€ 5,56
100 - 249
€ 5,03
250 +
€ 4,50
Related Products
Solid metal hoods with short and long jack ...
Description:
Solid metal hoods with short and long jack screws and anti-kink sleevingThe two halves of the hood lock into one anotherJack screws can be retrofittedOption of fitting hoods universally using locking mechanisms (100–7490)Ø 6.5 cable — 14 mm for flat ...
Our range of diecast, zinc D-Sub connector housings ...
Description:
Our range of diecast, zinc D-Sub connector housings from Phoenix Contacts feature a range of straight and angled connectors. Customer can make use of the IP20 hoods that have a spacious inner interior - this also makes them suitable for ...
Shielded EMI/RFI metal hood for use with d-type ...
Description:
Shielded EMI/RFI metal hood for use with d-type subminiature connectors. These cable mount shielded metal hoods are made from die cast zinc with a nickel plating, have a straight cable exit and a polycarbonate cable clamp strain relief. The jack ...
2 piece diecast zinc backshells with plastic strain ...
Description:
2 piece diecast zinc backshells with plastic strain relief inserts and earth connectionNickel plate finish. Meets VDE0781 and FCC207 shielding regsAttenuation; >40dB (30MHz to 1GHz)Accepts 3.5mm to 13mm cable.