TE Connectivity AMPLIMITE Series Zinc Alloy D-sub Connector Backshell, 9 Way

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

AMPLIMITE D-Sub Connector, Series HDE, HDP RFI/EMI Straight Exit Shielded Backshells

AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits or cable clamps with die cast or metal plated plastic shields for use with HDE Metal-Shell and HDP Metal-Shell (tin plated only) d-sub cable mount connectors. These AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits accept a variety of shell sizes and cable diameters, please see table for details.
Part numbers 5745171-x, 5745172-x, 5747173-x, 5745174-x and 5745175-x have zinc alloy shields plated with bright nickel over bright copper.
Part numbers 5745854-x, 5747099-x, 5745833-x, 5747100-x and 5748677-x have thermoplastic shields plated with nickel over copper.
Each kit also contains zinc plated stainless steel 4-4- fillister head screws, hex nuts and 4-40 mounting screws. Stock number 680-9355 is also supplied with 4 grommets.
For ferrules see stock numbers 718-0730, 745-5791 and 680-9383 typically
For two piece spring latch see stock number 450-9321

Note

Jackscrews must be purchased separately
Shielded backshells will not accept connector housings with clinch nuts

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Number of Contacts 9
D-Sub Shell Size E
Housing Material Zinc Alloy
Body Orientation Straight
Colour Silver
Series Amplimite
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
29 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
9,85
(excl. BTW)
11,92
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
€ 9,85
25 - 74
€ 8,54
75 - 199
€ 7,05
200 - 399
€ 6,70
400 +
€ 6,37
Verpakkingsopties
Related Products
A range of large crimp flanges for use ...
Description:
A range of large crimp flanges for use with TE Connectivity standard rail and Quick Lock all metal shielded back shells. For compatible hoods see typical part numbers 139-0759, 139-1679 and 139-0769. Crimp flanges, when used with appropriately sized crimp ...
All metal crimp barrels for use with large ...
Description:
All metal crimp barrels for use with large and small crimp flanges in the TE Connectivity rail and Quick Lock back shell series. See typical part number 139-1547 for large crimp flange range and 139-1556 for small crimp flange range. ...
Female screwlocks and screwlock kits for use with ...
Description:
Female screwlocks and screwlock kits for use with AMPLIMITE series HD, HDE, HDF and HDP Series d-sub connectors. These female screwlocks are made from cold rolled steel with a zinc plated clear or yellow chromate and come as individual screwlock ...
Metal shells accept round ribbon cableRapid assembly timeEnsures ...
Description:
Metal shells accept round ribbon cableRapid assembly timeEnsures protection from EMI/ESDFor mounting thumb screws see stock no. 448-5578.