RS PRO Female Solder D-sub Connector Contact, 32 22 AWG

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

RS High Density D Connector Solder and Crimp Contacts

A range of density and a half pin and socket crimp and solder contacts for use with high density D plug and socket connector housings (see stock numbers 481-459 and 481-465 typcially). The recommended wire size for the 1.5 density crimp pin and socket contacts is 28 to 24 AWG and 22 AWG the maximum wire size range for the 1.5 density solder pot pin and socket contacts.

Note

For crimp pins use crimp tool 481-516

Specificaties
Kenmerk Waarde
Gender Female
Contact Material Copper Alloy
Maximum Contact Resistance 12mΩ
Wire Size 32 22 AWG
Minimum Wire Size AWG 32AWG
Maximum Wire Size AWG 22AWG
Current Rating 5A
Termination Method Solder
7580 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
3700 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
0,584
(excl. BTW)
0,707
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 240
€ 0,584
€ 5,84
250 - 740
€ 0,516
€ 5,16
750 - 1990
€ 0,458
€ 4,58
2000 - 3990
€ 0,399
€ 3,99
4000 +
€ 0,373
€ 3,73
*prijsindicatie
Related Products
Connector shells in nylon, with type A and ...
Description:
Connector shells in nylon, with type A and type B locking together and are shaped to ensure correct orientation before engagement. Type A is cable mounting. Type B, whilst basically snap-in chassis mounting, may also be cable mounted if an ...
Molex 83000 series female crimp contacts for use ...
Description:
Molex 83000 series female crimp contacts for use with Commercial Micro-D High Density connectors.These female Micro-D connector contacts have a gold plating over Beryllium copper base material. Suitable for 26 AWG to 28 AWG wire. Termination by crimp or compression. ...
A range of Harting D-sub turned crimp contacts ...
Description:
A range of Harting D-sub turned crimp contacts for use within applicable Harting D-sub connectors that require a hard wearing and durable contact machined to exacting tolerances. Turned contactsWith round bushingPerformance level 1.
A range of Contacts designed for use in ...
Description:
A range of Contacts designed for use in mixed layout Connector shells including Power, Coaxial and High Voltage types.PCB holes for coax plug and socket: 4 holes 1.3mm dia. on 5.08mm ctrs, plus centre hole 1.3mm dia. PCB mounting inserts ...