SEGGER 8.12.00 J-Link PRO,

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 1.391,82

(excl. BTW)

€ 1.684,10

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 9 stuk(s) klaar voor verzending
  • 14 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 1.391,82

*prijsindicatie

RS-stocknr.:
131-1322
Fabrikantnummer:
8.12.00 J-Link PRO
Fabrikant:
SEGGER
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

SEGGER

Kit Contents

Emulator

Core Architecture

ARM

Kit Type

J-Link PRO Emulator

Standards/Approvals

No

Product Type

Programmers & In-Circuit Emulator

Sub Type

Programmer

For Use With

Flash Microcontrollers

J-Link PRO Probe


J-Link PRO is a JTAG/SWD programming and debug probe supporting a large number of processor cores and comes with integrated licenses for unlimited breakpoints in Flash memory, RDI/RDDI, GDB Server and J-Flash. An Ethernet connection allows use of the debug probe far away from the PC, over a hard-wired or wireless network.

Supported Processors


• ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5

• Microchip PIC32

• Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N

Features


• Direct download into Flash memory of most microcontrollers supported

• Download speed up to 3MB/sec

• 10/100 Ethernet via RJ45 socket

• Web interface for easy TCP/IP configuration (built-in webserver)

• Supports concurrent access to CPU by multiple applications

• Automatic core recognition

• Supports multiple target interfaces: JTAG, SWD

• Supports SWD/SWV (Serial Wire Debug / Serial Wire Viewer)

• Supports J-Flash Production Flash programming

• Maximum target interface speed: 50MHz

• Maximum SWO sampling speed: 100MHz

• Wide target voltage range: +1.2V to +5Vdc

• Embedded Trace Buffer (ETB) support

• Various target adapters and optical isolation adapters available

• RDI / RDDI interface

• Powered via USB connector

• Support for adaptive clocking

• All JTAG signals can be monitored, target voltage can be measured

• Target power supply: 300mA with overload protection

• Target interface: JTAG/SWD 20-pin

• PC interface: USB 2.0 HS or Ethernet RJ45 socket

• Galvanic isolation from host system via Ethernet

• Power and RESET LEDs

• Dimensions: 100 x 53 x 27mm

• Cross-platform support (runs on Windows, Linux, Mac OS X)

• Memory viewer (J-Mem) included

• Software Developer Kit (SDK) available

• Free software updates, 2 years of support

Target Adapters & Adapter Cables


• 131-1325 J-Link Target Power Supply Adapter;• 131-1326 J-Link 10-pin Needle Adapter;• 131-1327 J-Link RX100/200/600 MCU Adapter;• 131-1328 J-Link 19-pin ARM Cortex-M MCU Adapter;• 131-1329 J-Link 9-pin ARM Cortex-M MCU Adapter;• 131-1330 J-Link 14-pin ARM 7/9/11 MCU Adapter;• 131-1331 J-Link Microchip PIC32 MCU Adapter

Link Isolator Boards


• 131-1335 J-Link ARM JTAG Isolator Board;• 131-1336 J-Link ARM SWD Isolator Board;• 131-1337 J-Link USB Isolator Board

Gerelateerde Links