SEGGER J-Trace Isolator

  • RS-stocknr. 172-3027
  • Fabrikantnummer 8.07.10 J-Trace Isolator
  • Fabrikant SEGGER
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

SEGGER Microcontroller J-Trace

The SEGGER Microcontroller KG J-Trace is an isolator. It can be connected between a J-Trace Pro V2 or any ARM-board that uses the standard 19-pin Cortex-M connector to provide electrical isolation while keeping high-speed peed trace capabilities. This is essential when the development tools are not connected to the same ground. It is useful to protect the development tools from electrical spikes that often occur in some applications.

Features and Benefits:

• 1 kV DC isolation
• 3 LEDs to indicate emulator power, target power and target RESET
• ETM trace pins fully supported up to 75MHz trace clock
• JTAG frequency: up to 50MHz
• JTAG standard 19-pin connection supporting TDI, TMS, TCK, TDO, RESET and SWD/SWO signals
• Powered from an emulator, a few microamps (<25μA) drawn from a target
• SWD frequency: up to 4MHz

Specificaties
Kenmerk Waarde
Product Type Programmer
For Use With ARM-Board, 19 Pin Cortex-M
Kit Name J-Trace Isolator
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
365,98
(excl. BTW)
442,84
(incl. BTW)
Aantal stuks
Per stuk
1 - 2
€ 365,98
3 - 4
€ 336,71
5 - 9
€ 309,77
10 - 24
€ 284,99
25 +
€ 280,84
Related Products
The CY4500 EZ-PD Protocol Analyzer supports protocol analysis ...
Description:
The CY4500 EZ-PD Protocol Analyzer supports protocol analysis and decoding of the USB-PD (Power Delivery) and USB Type-C specifications packets on the Configuration Channel lines. The analyzer allows debugging of the USB Power Delivery communication. The CY4500 acts as a ...
J-Link PLUS is a JTAG programming and debug ...
Description:
J-Link PLUS is a JTAG programming and debug probe supporting a large number of processor cores. J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and ...
J-Link PRO is a JTAG/SWD programming and debug ...
Description:
J-Link PRO is a JTAG/SWD programming and debug probe supporting a large number of processor cores and comes with integrated licenses for unlimited breakpoints in Flash memory, RDI/RDDI, GDB Server and J-Flash. An Ethernet connection allows use of the debug ...
J-Trace PRO for Cortex-M enables continuous streaming trace ...
Description:
J-Trace PRO for Cortex-M enables continuous streaming trace via its Gigabit Ethernet interface, lifting the limitations of internal buffers and slow data transmission. J-Trace PRO can capture complete traces over long periods - thereby enabling the recording of infrequent, hard-to-reproduce ...