Metcal STDC-104 Standard Cartridge Tip

  • RS-stocknr. 296-2657
  • Fabrikantnummer STDC-104
  • Fabrikant Metcal
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Metcal MX-500DS De-soldering Station

The Metcal MX-500 Soldering, Desoldering & Rework System handles both SMT and through-hole soldering/rework with one power supply.,

Two switchable outputs
SMT/De-soldering/Rework station, allowing quick removal and replacing of components
Requires 60-100psi air supply
40W rating at 22°C (72°F) ambient
Operating temperature range 10°C to 40°C (50°F to 104°F)
Maximum enclosure temperature 65°C (150°F)

//media.rs-online.com/t_line/L2893163-01.gif
Specificaties
Kenmerk Waarde
Type Standard Cartridge Tip
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 25-10-2019, met een levertijd van 1 werkdag.
Prijs Each
51,80
(excl. BTW)
62,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 51,80
Related Products
Compressed-air independent, analogue hot air station for desoldering ...
Description:
Compressed-air independent, analogue hot air station for desoldering large-area SMD components. Air flow and temperature are continuously adjustable. Integrated stand-by function for pre-heating the nozzle - can be switched off internally if required. Without vacuum for lifting the components. Temperature ...
Weller D17 filters are used within the glass ...
Description:
Weller D17 filters are used within the glass tube for the WXDP 120 desoldering iron. The filters are used inside the glass solder collection tube and prevent solder from being sucked into the vacuum tubing and pump. D17 FiltersMade from ...
Weller Glass Collection tubes are complete with strap ...
Description:
Weller Glass Collection tubes are complete with strap and are for use with the WXDP 120 desoldering iron and D17 filters. Glass collection tube For use with WXDP 120 desoldering iron For use with D17 filters.
The WTA 50 tweezer is used to desolder ...
Description:
The WTA 50 tweezer is used to desolder SMT components.It has two independent heating elements and may be used with all Weller Temtronic soldering or desoldering stations.Safety rest available separately.