AD8129ARMZ Analog Devices, Differential Line Receiver 12 V, 15 V, 18 V, 24 V, 5 V, 9 V 8-Pin MSOP

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Differential Amplifiers, Analog Devices

Differential Amplifiers by Analog Devices are integrated and optimised for differential signalling applications. These speciality amplifiers have inherent common mode rejection properties that provide a low harmonic distortion with an output gain and phase matching. Applications include driving or receiving signals over long cable lengths, driving a balanced ADC input and looking for complementary outputs.

Differential Amplifiers, Analog Devices

Specificaties
Kenmerk Waarde
Power Supply Type Dual, Single
Typical Single Supply Voltage 5 V, 9 V, 12 V, 15 V, 18 V, 24 V
Typical Dual Supply Voltage ±12 V, ±3 V, ±5 V, ±9 V
Maximum Input Offset Voltage 0.8mV
Maximum Input Resistance 4MΩ
Maximum Voltage Gain 86dB
Minimum CMRR 86dB
Number of Channels per Chip 1
Mounting Type Surface Mount
Package Type MSOP
Pin Count 8
Rail to Rail No
Dimensions 3 x 3 x 0.85mm
Length 3mm
Minimum Operating Temperature -40 °C
Width 3mm
Maximum Operating Temperature +125 °C
Height 0.85mm
47 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
3,76
(excl. BTW)
4,55
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 3,76
10 - 49
€ 3,57
50 - 99
€ 3,19
100 - 249
€ 2,77
250 +
€ 2,63
Verpakkingsopties
Related Products
The ADA4927 by Analog Devices is a low ...
Description:
The ADA4927 by Analog Devices is a low noise, ultralow distortion, high speed, current feedback differential amplifier. This is an ideal choice for driving a high performance ADCs with resolutions up to 16 bits from dc to 100 MHz. The ...
The Instrumentation Amplifier ICs amplify the difference between ...
Description:
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals ...
The zero-drift amplifiers continuously self-correct for dc errors ...
Description:
The zero-drift amplifiers continuously self-correct for dc errors over time and temperature. Auto-zero and a chopper are combined to enable the amplifier to achieve microvolt-offsets and nanovolts per degree Celsius drift.
The AD8045 is a unity-gain stable voltage feedback ...
Description:
The AD8045 is a unity-gain stable voltage feedback amplifier with ultralow distortion, low noise, and high slew rate. With a spurious-free dynamic range of −90 dBc at 20 MHz, the AD8045 is an ideal solution in a variety of applications, ...