RS Pro IDM72 Handheld Digital Multimeter With UKAS calibration , 10A ac 750V ac 10A dc 1000V dc

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS PRO IDM73 Digital Multimeter

The RS PRO IDM73 is a compact, rugged and high performing digital multimeter. These handheld devices can measure capacitance, voltage, electrical current and resistance with diode and continuity check. This meter has an LCD display where the measurement readouts can be viewed.
The highest measuring category allows measurements direct at the source of the low voltage installation. Features optical interface for transmitting measuring results to PCs.

RS PRO have a great range of meters that are RS approved meaning that they are great value for money and high quality you can rely on.

Features and Benefits

Handy and compact housing
Large-scale display
6000 display count
DCA μA
Data Hold
Min / Max function
Frequency Counter
Capacitance Measurement
Auto Power Off
Shock resistant (1 m drop)
Protective Holster with a tilt stand and lead storage
Large-scale display
True RMS reading on AC mode
DCA μA, A
ACA A (True RMS)
Optional RS-232 interface and software

What does it measure?

DC and AC Voltages - up to 1000 V dc and 750 V ac
DC and AC Current - up to 10 Amps
Resistance and continuity checking - up to 200 MΩ
Diode - open circuit voltage up to 3 V
Capacitance - range from 6 nF to 6 mF

Extra Protection

The multimeter is supplied with a protective holster that includes a built-in stand, a nail hook and convenient test lead storage. This holster provides an extra degree of protection and convenience.

Slim Design

Ergonomically designed slim shape with one-handed operating knob and buttons. It just fits into the palm of your hand.

RS-232 Optical Interface

The IDM73 has an RS-232 optical interface to connect to a PC for data acquisition. Allowing measurements to be transferred to a PC for further analysis.

Batteries

Batteries can be easily replaced by unscrewing only two screws to remove the battery door for battery replacement. Designed for users convenience without opening the bottom case.

Display

The LED display turns ON/OFF at the touch of a button, and automatically turns off to save battery life.

What does it include?

Pair of Test Leads
Battery (Installed)
Protective Holster
User Manual

Typical Applications:
A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries

Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.

Standards

CAT. IV 600 V / CAT. III 1000 V

The RS Pro IDM72 is from the IDM70 series of high-performance digital multimeters. The IDM72 digital multimeter (DMM) is designed to test voltage, current, frequency, capacity and resistance. It features an optical interface for transferring measurement data to a PC.

Why choose the IDM72 multimeter?

The IDM72 is a compact handheld multimeter, ideal for using in your workshop or on-site. It is also battery-powered, which is great for portability. There is also a digital 6000 count LCD screen.
A robust plastic housing and supplied holster provides protection against drops from up to 4ft.
The IDM72 multimeter features and automatic power-off function, therefore preserving battery life.
When measuring your electronic circuit or battery, it’s important that you get an accurate reading. The IDM72 is RS Approved, meaning not only is it great value for money, but you can rely on its quality. It also comes with an impressive 3 year warranty.

Additional features:

Capacitance measurement
Frequency counter
True RMS reading on AC mode
DCA μA, A
Data Hold
Min / Max function

What does it include?

IDM72 multimeter
Test leads (red & black)
Battery
User manual
Protective holster

Dimensions - 158 x 76 x 38 mm

Calibrated options:

123-3242 (Non-calibrated)
123-3440 (RSCAL)
123-3441 (UKAS)

IDM70 Series Multimeters:

123-3367 - IDM71
123-3242 - IDM72
123-3243 - IDM73

Specificaties
Kenmerk Waarde
Multimeter Type Handheld
Absolute Maximum AC Current Measurement 10A ac
Absolute Maximum DC Current Measurement 10A dc
Calibrated UKAS
Absolute Maximum AC Voltage Measurement 750V ac
Absolute Maximum Resistance Measurement 60MΩ
Absolute Maximum DC Voltage Measurement 1000V dc
Absolute Maximum Capacitance Measurement 6mF
True RMS Yes
Maximum Frequency 60MHz
Display Type LCD
Model Number p IDM72
DC Current Measurement Resolution 0.1µA dc
AC Current Measurement Resolution 0.1µA ac
DC Voltage Measurement Resolution 0.1mV dc
AC Voltage Measurement Resolution 0.1mV ac
Resistance Measurement Resolution 100mΩ
Capacitance Measurement Resolution 1pF
Safety Category Level CAT III, CAT IV
Dimensions 76 x 38 x 158 (without Holster) mm, 82 x 44 x 164 (with Holster) mm
Best DC Voltage Accuracy ±0.5% + 2 Digits
Weight 400g
Battery Life 300 h
Best AC Voltage Accuracy ±0.9% + 5 Digits
Best Capacitance Measurement Accuracy ±1.9% + 8 Digits
Battery Type IEC 6F22, NEDA 1604, 9V
Best Resistance Measurement Accuracy ±0.7% + 2 Digits
Height 158 (Without Holster) mm, 164 (With Holster) mm
Maximum Operating Temperature +50°C
Minimum Operating Temperature 0°C
Best AC Current Accuracy ±1.5% + 5 Digits
Best DC Current Accuracy ±1% + 2 Digits
Safety Category Voltage 600 V, 1000 V
Width 38 (Without Holster) mm, 44 (With Holster) mm
Length 76 (without Holster) mm, 82 (with Holster) mm
306 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
172,76
(excl. BTW)
209,04
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 172,76
Related Products
Combines the advantages of an analogue instrument with ...
Description:
Combines the advantages of an analogue instrument with the safety features and reliability of a digital instrument. 9 DC voltage ranges: 150mV to 1500V6 AC voltages ranges: 5V to 1500V7 DC current ranges: 50μA to 10A6 AC current ranges: 500mA ...
RS PRO RSDM3055 (123-6465) is a 5 digit ...
Description:
RS PRO RSDM3055 (123-6465) is a 5 digit multimeter with a dual-readout display. RS PRO RSDM3055A (123-6466) is of similar specification but, in addition, includes a USB to GPIB adapter. These devices can measure capacitance, voltage, electrical current, frequency, period, ...
RS PRO IDM505 digital multimeter is designed for ...
Description:
RS PRO IDM505 digital multimeter is designed for harsh environments. With a watertight gasket at the seams rotary switch, input terminal and battery cover to keep out dust, dirt and splashing. These handheld devices can measure capacitance, voltage, electrical current, ...
Compact yet tough, the Amprobe AM-510 autoranging digital ...
Description:
Compact yet tough, the Amprobe AM-510 autoranging digital multimeter delivers rugged, accurate performance for light commercial and advanced residential applications like rewiring an electrical panel, installing heated floors and light fixtures, troubleshooting and repairing home appliances, electrical sockets, ...