RS PRO IDM91E Handheld LCD Digital Multimeter, AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Diode Test,

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS PRO IDM91E Rugged Industrial Digital Multimeter

RS PRO IDM91E digital multimeter (DMM) designed for harsh environments. This handheld DMM is a tool which can measure capacitance, voltage, electrical current and resistance with diode and continuity check. The rugged body guarantees drop prof resistance from up to 1.5 m. The multimeter is also waterproof with a rating of IP54. Featuring fuse protection on both 200 mA and 10 A current ranges and a specially designed beep guard system. That system provides a constant beep warning if the test leads put in the current jacks and select an incorrect function.

The meter is supplied with a protective holster that includes a built-in tilt stand, a nail hook, and convenient test lead storage. This holster provides an extra degree of protection and convenience for your meter.

RS PRO IDM 91E Multimeters are designed to meet Class II IEC 1010 and UL 3111 standards for the safest operation in all applications.

This device has been designed for the most demanding users that value solid construction and highly accurate measurements.

Features and Benefits

• 3 1/2 digit LCD
• 0.5% basic DCV accuracy
• 1.3% basic ACV accuracy
• 1.0% basic DCA accuracy
• 1.5% basic ACA accuracy
• 0.75% basic OHM accuracy
• Continuity and diode test
• 500V dual-fuse protection
• Auto power-off
• Beep Guard™ warning system
• Water resistant rating IP64
• 1.5m (5 feet) dropproof
• Protective holster with tilt stand
• IEC 1010-1 CAT.III 600V/ CAT.II 1000V
• One set of 1:1 probe

What does it measure?

DC and AC Voltages - up to 600 V
DC and AC Current - up to 10A
Resistance and continuity checking - up to 20 MΩ
Diode - open circuit voltage up to 3.2V

Batteries?

300 Hours (Alkaline)
Single 9V (NEDA 1604 or IEC 6F22)
Low battery indicator
Auto power off - approx 30 minutes after the last operation

What It Incudes?

Installed battery
Test Leads
User manual
Protective holster

Dimensions:

Without Holster:
Width 84 mm
Length 175 mm
Height 31 mm
With Holster:
Width 95 mm
Length 192 mm
Height 50 mm

Typical Applications:
A digital multimeter is a handy test tool that measures electrical values such as voltage, current, and resistance. A DMM is used by technicians in the following areas:
Electrical and electronic industries

Safety guidelines
When using any electrical test equipment it is advised that you refer to the user’s manual for proper working operating procedures and safety precautions in order to avoid potential safety hazards.

Standards

IEC 61010-1, CAT.III 300 v, CAT.II 600 V

Supplied with

Specificaties
Kenmerk Waarde
Multimeter Type Handheld
Absolute Maximum AC Current Measurement 10A ac
Absolute Maximum DC Current Measurement 10A dc
Calibrated RSCAL
Absolute Maximum DC Voltage Measurement 600V dc
Absolute Maximum Resistance Measurement 20MΩ
Absolute Maximum AC Voltage Measurement 600V ac
Functions Measured AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Diode Test, Resistance
True RMS No
Display Type LCD
Model Number p IDM91E
AC Current Measurement Resolution 0.1µA ac
DC Current Measurement Resolution 0.1µA dc
Resistance Measurement Resolution 100mΩ
AC Voltage Measurement Resolution 0.1mV ac
DC Voltage Measurement Resolution 0.1mV dc
Best Resistance Measurement Accuracy ±0.75% + 1 Digits
Battery Type IEC 6F22, NEDA 1604, 9V
Safety Category Voltage 600V
Best DC Voltage Accuracy ±0.5% + 1 Digits
Dimensions 84 x 31 x 175 (without Holster) mm, 95 x 50 x 192 (with Holster) mm
Length 84 (without Holster) mm, 95 (with Holster) mm
Width 31 (Without Holster) mm, 50 (With Holster) mm
Best AC Current Accuracy ±2.5% + 3 Digits
Best DC Current Accuracy ±1% + 1 Digits
Height 175 (Without Holster) mm, 192 (With Holster) mm
Minimum Operating Temperature 0°C
Best AC Voltage Accuracy ±1.25% + 4 Digits
Safety Category Level CAT III
Maximum Operating Temperature +50°C
Weight 550 (With Holster)g
Battery Life 300 h
264 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
120,08
(excl. BTW)
145,30
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 120,08
Related Products
Measure with confidence with up to 8 ppm ...
Description:
Measure with confidence with up to 8 ppm 1-year DCV accuracy (4ppm with option)Maximize productivity with fast measurement speeds up to 100K readings/sUp to 148K reading memory for prolonged data logging (with option).
Keithley DMM7510 7 digit precision graphical sampling digital ...
Description:
Keithley DMM7510 7 digit precision graphical sampling digital multimeter is a high-resolution multimeter. The DMM7510 combines all the advantages of a precision digital multimeter with a touch screen display, high-speed performance and high resolution digitiser. The whole package provides you ...
METRAHIT ENERGY multimeter is exceeding all previous performance ...
Description:
METRAHIT ENERGY multimeter is exceeding all previous performance limits and developed for professionals. Simultaneous TRMS current and voltage measurement with a resolution of 60000 digits and more than 35 different measuring functions. All the important power qualities can be precisely ...
The 2001 offers measurement technology which makes them ...
Description:
The 2001 offers measurement technology which makes them attractive options to higher-priced, high-end digital multimeters. Other 7 or 8 digit DMMs may average multiple readings to extend their resolution. The resolution specifications of the 2001 is based on a 28-bit ...