HOBUT M850-LCD , LCD Digital Panel Multi-Function Meter, 96mm x 96mm

  • RS-stocknr. 775-2717
  • Fabrikantnummer M850-LCD
  • Fabrikant HOBUT
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

M850 Multifunction Meter

The Hobut 96 x 96mm is a multi-function, easy to use universal LCD power meter with user programmable functions, such as GT ratios. Suitable for any 1 or 3 phase system and has communication modules available separately.

Standard Functions:

• Phase Voltage (V)
• Phase to Neutral Voltage (V)
• Phase Current (I)
• Frequency (Hz)
• Active Power (W)
• Active Energy (kWh)
• Reactive Power (VAr)
• Apparent Power (VA)
• Reactive Energy (VArh)
• Power Factor (PF)
• Instantaneous Amp Demand, Instantaneous Watt Demand, Instantaneous VA Demand, Maximum Amp Demand, Maximum Watt Demand, Maximum VA Demand, Neutral Current Measurement

User Programmable Functions:

• Current Transformer Ratio
• Voltage Transformer Ratio
• Baud Rate, Parity, Stops
• AC or DC AUX
• Screen colour (blue, green or white)
• Single or 3 phase system
• Input voltage range 28-570V
• RS485 address, 1-247
• Security code access for programming

Note

Both RS485 output 668-4070 (Modbus protocol) and pulsed output 668-4073 (for Wh or VArh) are plug-in options

Specificaties
Kenmerk Waarde
Properties Measured Current, Energy, Frequency, Power, Voltage
Display Type LCD
Cutout Height 96mm
Cutout Width 96mm
Depth 82mm
Minimum Temperature 0°C
Maximum Temperature +60°C
Series M850
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
10 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
165,85
(excl. BTW)
200,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 165,85
Related Products
Very low loop drop: 1.8V typical (2V max)Display ...
Description:
Very low loop drop: 1.8V typical (2V max)Display range and decimal point selected by DIP switchesNon-interacting adjustment of gain (span) and offset (zero) via 20-turn potentiometers2-wire screw terminal connectionPin-for-pin compatible with the DMS-20PC-4/20S and has a bezel available separately which ...
LCD compact digital/virtual analogue indicators with common dimensions ...
Description:
LCD compact digital/virtual analogue indicators with common dimensions requiring a single 5.5mm diameter mounting hole unless specified otherwise. A rubber seal is included providing splash proof protection for the units when fitted to the meter during installation. All have an ...
Single-channel digital indicators display measurements and monitor limit ...
Description:
Single-channel digital indicators display measurements and monitor limit values in various industrial applications. The indicators have a configurable analogue input that permits direct connection to various outputs with a standard signal. The sampling rate for the measurement input is 3 ...
Digital temperature display toolMicroprocessor controlSize: 76 x 36 ...
Description:
Digital temperature display toolMicroprocessor controlSize: 76 x 36 mm10 A changeover relay for limit value monitoringAdjustable switching hysteresisConfigurable alarm suppressionThree-digit backlit LCD with 13 mm digit height and special symbols for °C, °F, h, min, sCode-protected parameter levelProgrammable ...