Siemens PAC3100 LCD Digital Power Meter, 92mm x 92mm, , Class 1 Accuracy

  • RS-stocknr. 723-2232
  • Fabrikantnummer 7KM3133-0BA00-3AA0
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Sentron PAC3100

The power monitoring devices of the SENTRON PAC series are used to measure and indicate all relevant network parameters in low-voltage power distribution. They can be used for single-phase measurements as well as for multiphase measurements in 3 and 4-conductor networks.

Display of electrical measured values and consumption values in switchgear assemblies, infeed or tap-off units
Intuitive operation using 4 function buttons and multilingual plain text displays
Min. 8 languages
Integrated digital in- and outputs
RS 485-interface for the transfer of measured values and configurations
AC/DC universal power supply unit
Screw terminals for connecting current and voltage

Approvals

CE(Europe), cULus(US/ Canada), C-Tick(Australia), GOST(Russia)

Specificaties
Kenmerk Waarde
Cutout Height 92mm
Cutout Width 92mm
Display Type LCD
Pulse Output Yes
Depth 51mm
Digit Height 54 mm
Meter Accuracy Class 1
Minimum Temperature -10°C
Series PAC3100
5 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
385,20
(excl. BTW)
466,09
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 385,20
Related Products
The Curtis enGage II is a dual function, ...
Description:
The Curtis enGage II is a dual function, microprocessor based instrument that can be factory or user defined to monitor various functions including fuel, temperature, pressure, voltage, battery state of charge and maintenance/status. Dual function: operates as a voltage monitor ...
Panel mount digital multimeter from Trumeter offers a ...
Description:
Panel mount digital multimeter from Trumeter offers a 200mv full scale reading input and operates from either 5 V dc or 9 V dc power. • 3.5 digits (10 mm) LCD display (914-6751)• 3.5 digits (14 mm) LCD display (914-9754)• ...
The ND10 is a digital programmable power meter ...
Description:
The ND10 is a digital programmable power meter designed to measure 3 phase, 4-wire power network parameters in both balanced and unbalanced systems. It displays measured quantities and their simultaneous digital transmission. The power meter also controls and optimises the ...
The A series is a advanced meter product ...
Description:
The A series is a advanced meter product range for installations up to 80 A direct connected or transformer connected both for current and voltage (CT/VT) The display is pixel-oriented and can display up to four quantities at the same ...