Schneider Electric PowerLogic ComX Gateway Server,

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Schneider Electric Energy Server ComX 510

ComX 510 Energy Server from Schneider Electric is an all-in-one box energy management solution. When the server is connected, it provides detailed and global views of energy consumptions. The energy server collects data from devices in the same location, such as smart panels, water meters and temperature sensors. It delivers the data on a local area network (LAN) or to remote server.

• DIN Rail mounting
• Easy to read and understand, inside familiar user interface
• No additional hardware or software required
• Especially suitable for buildings up to 10000 m²
• Data storage duration up to 2 years
• Quick fitting into electrical switchboards
• Quick set-up and configuration
• 8 inputs; 2 analogue & 6 digital
• RJ45/RS485 communication network
• 4 GB SDRAM, 256 MB flash & 128 MB RAM memory capacity
• IP40 (front face) & IP20 (terminal block) protection

Specificaties
Kenmerk Waarde
Depth 69mm
Minimum Temperature -25°C
Maximum Temperature +70°C
Series Gateway
Approvals C-Tick, CE, CUL, EN 60950, EN 61010-1, UL, UL 508, UL 60950
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
942,97
(excl. BTW)
1.140,99
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 942,97
5 - 9
€ 916,78
10 +
€ 892,00
Related Products
The MEMO4 is an energy meter dedicated to ...
Description:
The MEMO4 is an energy meter dedicated to measuring and rebilling energy consumption on a 230 V ac single phase network. The meter allows you to check the main quantities at a glance on its backlit LCD screen due to ...
The Phoenix Contact digital power meters is a ...
Description:
The Phoenix Contact digital power meters is a 3-phase power meter for measuring active power with direct measurement of up to 500V/80A with S0 output, with digital input and MBUS interface. • 80% maximum operational relative humidity• Screw connection method ...
DIRIS A-40, Power Metering and Monitoring Device, 110-400 ...
Description:
DIRIS A-40, Power Metering and Monitoring Device, 110-400 VAC 50/60 Hz, 120-300 VDC, Class 0.5 for the global measurement chain, 3 Digital inputs / 2 Digital outputs, RS485 output, SubD9 connector output, Modbus RTU, Profibus DPV1.
The iME3100 energy measurement counter is used to ...
Description:
The iME3100 energy measurement counter is used to measure the active energy consumed by single-phase, three-phase or three-phase + neutral type electrical circuits. Operating voltage: 3 x 100/173 Vac (50/60 Hz) → 3 x 277/480 Vac (50/60 Hz)Imax: 63 AIP40 ...