Hirschmann GSA 2P+E DIN 43650 A, Male Solenoid Valve Connector, No, 400 V ac/dc Voltage

Suitable for use with GDM, GDML and GDME sockets

These connectors are only suitable for power coupling to a fixing point or item of plant, or for internal wiring of equipment.

Safely connect your solenoid valve or pressure sensor with this connector from Belden's Hirschmann range. It comes fitted with lugs, ready for the solder termination of your wires. These have a silver surface to ensure they're reliably conductive. Pre-drilled holes mean you can screw-mount the base. Thanks to a wide operating temperature of -40°C to +125°C, you can rely on this unit to perform in demanding industrial settings.

• Voltage rating of 400V AC/DC, for use with high-power applications
• Type-A receptacle to work with sensor and valve circuits
• Housing material is flame retardant to improve fire safety

• Machine building
• Materials handling
• Transportation
• Process automation

Yes, this valve connector has two poles and an earth for safe grounding.

DIN 43650-A

Type A DIN 43650 Hirschmann

A comprehensive range of cable sockets, appliance connector bases and accessories typically for use with solenoid valves on pneumatic and hydraulic equipment. The inner connector can be rotated through 90° increments so the gland can be positioned in all four directions. Housing material is glass-filled nylon making them impact resistant.,All Hirschmann appliance connectors feature terminals that can be screwed onto bare or ferruled conductors, or will accept crimp ring/fork terminals under the head of the screw.,All are supplied complete with centre retaining screw, while plug bases are solder terminated and supplied with fixing screws. Suitable gasket to provide IP65 sealing, stock-no. 156-4729. Supplied in bags of 10