Legrand 24VA DIN Rail Panel Mount Transformer, 215V ac, 230V ac, 245V ac Primary 1 x, 24V ac Secondary

  • RS-stocknr. 620-3097
  • Fabrikantnummer 0 442 14
  • Fabrikant Legrand
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Control and signalling transformers, 442 series

Single-phase control and signalling transformers (50 → 60 Hz - class 1).
Active parts protected by cover up to 1000 VA.
Mounting on full or perforated platinum, or rail according to power.
Direct mounting possible on symmetrical DIN rail up to 250 VA.
More compact than previous models (423 series).
Interference filtering (except stock no. 620-3110).
Voltage adjustment: ±15 V.
Features a marking area.
Supplied with connection strip 0 V secondary earth terminal.

Standards

  EN 61131-2, EN 60204-1 and EN60439-1, IEC EN 61558-2-2 and 2-4 or 2-6, UL506

Approvals

  CSA C22-2-N°66.

Specificaties
Kenmerk Waarde
Primary Voltage Rating 215V ac, 230V ac, 245V ac
Secondary Voltage Rating 24V ac
Power Rating 24VA
Mounting Type DIN Rail
Number of Outputs 1
Length 94mm
Width 112mm
Depth 113mm
Dimensions 94 x 112 x 113mm
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
Maximum Temperature +50°C
Weight 2.6kg
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
97,00
(excl. BTW)
117,37
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 97,00
10 - 24
€ 94,58
25 - 49
€ 89,85
50 - 99
€ 86,81
100 +
€ 82,45
Related Products
Chassis mounting frame construction low voltage mains transformers ...
Description:
Chassis mounting frame construction low voltage mains transformers with a single 230Vac 50/60Hz primary winding. This range of single-phase single-winding safety and isolation transformer is primarily designed for use in repetitive applications.ABT 7 series transformers provide enhanced electrical isolation ...
Safety isolating and isolating control transformersTwin secondary winding ...
Description:
Safety isolating and isolating control transformersTwin secondary winding for series or parallel connection63,100,160 and 250VA transformers can be mounted on standard 35mm DIN railAll units have 4 hole panel mount fixingsEasy installation 4mm² cage clamp terminalsInsulation catagory Class B.
Safety isolating transformer single phaseDIN rail mount (up ...
Description:
Safety isolating transformer single phaseDIN rail mount (up to 250VA) or Surface mount with screws (400VA & above) Terminals with finger protection IP2x or xxB up to 400VANew design provides interference filter between windingsClear laser engraved markingsSuitable for maximum 50°C ...
Chassis mounting frame construction low voltage mains transformers ...
Description:
Chassis mounting frame construction low voltage mains transformers with a single 230Vac 50/60Hz primary winding. Single-phase single-winding safety and isolation transformers.Able to supply higher powers on occasion.Feature a panel display to reduce ESD. Screw termination.Plate mounting.