Idec, DIN Rail Stop, BN Series

  • RS-stocknr. 830-2975
  • Fabrikantnummer BNL-5
  • Fabrikant Idec
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Idec BN Series

The BN series of terminal blocks are a traditional screw terminal block, with full size screws (nut and bolt termination on larger models) and current ratings up to 150A. All models mount onto standard 35mm DIN rail.

Modular construction
UL94-V0 flammability rating
Mount on standard 35mm DIN rail
BN: Current capacities up to 150A
Optional dust covers and marking strips

Idec Terminal Blocks, DIN Rail Terminals and Accessories

IDEC terminal blocks are moulded from UL94-V0 material, with excellent flame and shock resistance, and mount on a standard 35mm DIN rail or surface mount (2 types). They come in sectional or one-piece construction with current ratings from 10A to 350A. Models include fuse blocks with optional blown fuse indication. A variety of accessories are available, including marking strips and dust covers.

Specificaties
Kenmerk Waarde
Accessory Type DIN Rail Stop
Series BN
For Use With BA111T, BA211T, BA311T, BA411S, BAF111SDU, BAF111SU, BNF10DW, BNF10NW, BNF10SW, BNH10W, BNH15LW, BNH15MW, BNH30W, BNH50W
24 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1014 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
1,55
(excl. BTW)
1,88
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1,55
Related Products
Bases for fixing commining blocks to DIN rail. ...
Description:
Bases for fixing commining blocks to DIN rail. Material: polypropylene, natural colourMaximum continuous operating temperature: 85°CSelf extinguishing: UL 94 - V2; IEC 695-2-1 to 850°C.
High quality, industry standard terminals designed for mounting ...
Description:
High quality, industry standard terminals designed for mounting on symmetrical TS35 (top-hat profile) DIN Rail. With high reliability and variety of designs, the SAK series from Weidmuller make planning easier and optimise safety. The terminals are manufactured from polyamide 6.6 ...
Designed for where isolation of a circuit is ...
Description:
Designed for where isolation of a circuit is necessary. The disconnect lever may be opened even when test plugs are fitted and may also be removed completely if required. For 2 and 10 way jumper bars see Z Series Accessories. ...
Jumper bar can be fitted without loss of ...
Description:
Jumper bar can be fitted without loss of cable entry spaceAvailable in 2 or 4 spring versionsMounts on TS15 railTerminals have a current rating of 15A to 24AJumper bars are rated at 24A.