NXP LED Driver, 1.6 V Output, 10 mA
- RS-stocknr.:
- 219-4628
- Fabrikantnummer:
- PCA9685PW,118
- Fabrikant:
- NXP
Bulkkorting beschikbaar
Subtotaal (1 verpakking van 5 eenheden)*
€ 15,31
(excl. BTW)
€ 18,525
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending 2.500 stuk(s) vanaf 11 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk | Per verpakking* |
|---|---|---|
| 5 - 45 | € 3,062 | € 15,31 |
| 50 - 95 | € 2,614 | € 13,07 |
| 100 - 245 | € 2,078 | € 10,39 |
| 250 - 995 | € 2,036 | € 10,18 |
| 1000 + | € 1,996 | € 9,98 |
*prijsindicatie
- RS-stocknr.:
- 219-4628
- Fabrikantnummer:
- PCA9685PW,118
- Fabrikant:
- NXP
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | NXP | |
| Product Type | Display Controller | |
| Output Voltage | 1.6 V | |
| Input Voltage | 2.3/5.5 V | |
| Mount Type | Surface | |
| Sub Type | LED Driver | |
| Terminal Type | Solder | |
| Driver Current | 10 mA | |
| Series | PCA9685 | |
| Standards/Approvals | RoHS | |
| Power Dissipation | 400mW | |
| Alles selecteren | ||
|---|---|---|
Merk NXP | ||
Product Type Display Controller | ||
Output Voltage 1.6 V | ||
Input Voltage 2.3/5.5 V | ||
Mount Type Surface | ||
Sub Type LED Driver | ||
Terminal Type Solder | ||
Driver Current 10 mA | ||
Series PCA9685 | ||
Standards/Approvals RoHS | ||
Power Dissipation 400mW | ||
The NXP PCA9685 is an I2C bus controlled 16 channel LED controller optimized for red or green or blue or amber (RGBA) colour backlighting applications. Each LED output has its own 12 bit resolution (4096 steps) fixed frequency individual PWM controller that operates at a programmable frequency from a typical of 24 Hz to 1526 Hz with a duty cycle that is adjustable from 0 % to 100 % to allow the LED to be set to a specific brightness value. All outputs are set to the same PWM frequency.
No output glitches on power-up
Supports hot insertion
Low standby current