Phoenix Contact Distribution Block, 7 Way, 500 V, 41A, Grey

Bekijk alle Distribution Blocks

Subtotaal (1 doos van 10 eenheden)*

€ 37,95

(excl. BTW)

€ 45,92

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Dozen
Per Doos
Per stuk*
1 +€ 37,95€ 3,795

*prijsindicatie

RS-stocknr.:
136-3237
Artikelnummer Distrelec:
304-30-783
Fabrikantnummer:
3273460
Fabrikant:
Phoenix Contact
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Phoenix Contact

Product Type

Distribution Block

Number of Ways

7

Current

41A

Housing Material

Polyamide

Voltage

500 V

Wire Size - Load Side

26 AWG

Minimum Operating Temperature

-35°C

Wire Size - Line Side

26 AWG

Colour

Grey

Maximum Operating Temperature

105°C

Length

28.2mm

Height

21.2mm

Series

PTFIX

Standards/Approvals

CSA

Width

25.2 mm

Land van herkomst:
PL

Phoenix Contact Grey Distribution Block, 7-Way, 24 A - PTFIX 6/6X2,5-G GY - 3273460


Use this 7-way distribution Block from Phoenix Contact to distribute power from a single input source to various devices. It has a housing MADE of a Durable polyamide material that's heat and corrosion-resistant, making it a good choice for use in demanding industrial environments. This material also has excellent insulation properties, so it protects you and your equipment against electrical hazards.

The component comes ready to use thanks to its push-in termination technology. To connect your devices with minimal effort, you can simply plug your conductors into the terminals without using any specialist tools. The unit also offers a variety of mounting options – clip it onto your DIN rail or use adhesive to install it on an electrical panel. You'll find blocks such as this in a range of settings, from motorhomes to domestic set-ups and commercial environments.

• Cable cross-sectional area (CSA) of 0.14 to 4 mm²

• Grey in colour

• Current rating of 24 A, 41 A at 6 mm²

• Not fused

• Voltage rating of 500 V

• Wire size of 26 to 12 AWG (American Wire Gauge)

PTFIX Distribution Blocks


Phoenix Contact PTFIX series distribution blocks with push in connection offer a flexible distribution solution with different numbers of positions and mounting options. They can be used straight away and expanded as needed. Simply unpack, connect, and you are done.

Features and Benefits


Push in connection

Voltage: 500 V

Current: 24 A

Variants in 1.5 mm² and 2.5 mm²

2.5 mm² power blocks with additional 6 mm² Terminal point

Number of Terminal points: 6, 12 and 18

Can be bridged and aligned with standard plug-in bridges

Testing option for all common test probes

Push-In Connection Terminal Blocks


The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.

Gerelateerde Links