Schneider Electric 18.5 kW DOL Starter, 690 V ac, 3 Phase, IP40

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

Standard Control Units

Ideal to satisfy the basic protection requirements for motor starters; thermal overload and short-circuit.

Protection against overloads and short-circuits
Protection against phase failure and phase imbalance
Protection against insulation breaks (equipment protection only)
Manual reset
Class 10 for 3-phase motors

Note

'For use with' refers to a compatible power base in amps.

Schneider Electric TeSys U

The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection of motor protection parameters and control voltages, they can be created or changed in seconds by changing the plug-in modules. A host of DOL starting applications can be catered for.

  • Faster design with fewer components needed

  • Quicker panel build with faster assembly time and fewer wires per starter

  • Space saving 45mm width up to 32A (even for reversing) allowing smaller panels

  • Flexible and upgradeable with plug-and-play function modules

  • Voltage and protection parameters can be determined after assembly and wiring

  • Broad band electronic control unit provides improved overload protection with fewer components

  • Expandable plug-and–play diagnostics

  • Total co-ordination for fast return to service after a short circuit fault

Tesys model U is easy to select:

First choose a Power Base- 12A or 32A, direct on line or reversing. The power base includes 2 auxiliary contacts.
Then choose the plug-in protection module by motor full load current and control voltage required.
Additional plug in functions can be selected and added at any time.
The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option

Warning

  • Schneider are in the process of amending the colour of the TeSys range, from White to Black. This means that the stock you receive could be either of these colours. Please be assured that the colour change in no way affects the Fit, Form or Function of the product.
Specificaties
Kenmerk Waarde
Power Rating 18.5 kW
Motor Starter Type DOL
Voltage Rating 690 V ac
IP Rating IP40
Phase 3
Number of Poles 3P
Series LUC
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
120,40
(excl. BTW)
145,68
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 120,40
Related Products
Schneider Electrics non-reversing DOL (direct on line) starters ...
Description:
Schneider Electrics non-reversing DOL (direct on line) starters form part of the fitted TeSys range of components. They are predominantly used for motor driving workshop machinery, large fans, water pumps and similar types of equipment. • High quality and reliable ...
IP55 sheet steel (epoxy painted RAL 7032) enclosed ...
Description:
IP55 sheet steel (epoxy painted RAL 7032) enclosed starter complete with isolator for Star Delta applications to comply with IEE Regulations, 16th Edition on Isolation and Switching.,AC-3 rated triple pole contactors with IP20 terminals and triple pole AC-3 rated switch ...
Open chassis Star Delta starter for use within ...
Description:
Open chassis Star Delta starter for use within customised enclosures, enabling quick and easy installation and direct mounting onto 35mm DIN rail.,Manufactured using readily available Moeller components which conform to the latest IEC 947 standards and pre-wired to accept the ...
Motor direct starter in housingEasy assembly thanks to ...
Description:
Motor direct starter in housingEasy assembly thanks to pre-wiringShort circuit, motor overload and device protectionReady for connection, no additional overload relay requiredWith undervoltage release moduleSwitch settings: Hand - 0 - AutomaticCam switch for On/OffLockable main / EMERGENCY-STOP switchIn-situ or ...