Schneider Electric 0.25 kW Automatic 3P DOL Starter, 415 V ac, 3 Phase, IP65

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CZ
Productomschrijving

Direct motor control starter

The starter features a TeSys LC1Kxx contactor, 1 TeSys LR2k thermal relay (depending on model), 1 green "On" button, 1 red "Stop / Reset" button and an indicator light.

Note

Please refer to datasheet to confirm which model is supplied with or without relay.

Standards

IEC 947-4-1, IEC 439-1, VDE 0660-102 and EN 60947

Plastic/Metal Combination Housings

These motor starters are available in a selection of formats. All have removable steel base plates for rigidity when mounting to an uneven surface and ease of earthing and wiring and an impact resistant polycarbonate front cover which is adaptable to enable the fitting of other components without drilling. Switching category is AC3 and the enclosures are IP65 rated.

Specificaties
Kenmerk Waarde
Power Rating 0.25 kW
Motor Starter Type DOL
Voltage Rating 415 V ac
IP Rating IP65
Phase 3
Number of Poles 3P
Motor Starter Functionality Automatic
Overall Length 160mm
Enclosure Yes
Overall Width 78mm
Overall Depth 108mm
Series LE1
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
88,70
(excl. BTW)
107,33
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 88,70
Related Products
The Phoenix Contact ATEX approved, ELR series of ...
Description:
The Phoenix Contact ATEX approved, ELR series of Contactron 3 in 1 hybrid motor starters.The forward running motor starters are designed for DIN Rail mounting and for starting 3 phase motors up to 500 V ac where adjustable overload shutdown ...
Sirius 3RM1 motor starters are compact 22.5 mm ...
Description:
Sirius 3RM1 motor starters are compact 22.5 mm wide devices that combine various functions in a single enclosure.They consist of combinations of relay contacts, power semiconductors (hybrid technology), and an electronic overload relay for switching induction under normal operating conditions. ...
A powerbrake unit is used where fast, efficient ...
Description:
A powerbrake unit is used where fast, efficient and predictable stopping of a machine in the shortest possible time is required. Using the d.c. injection method, it provides a controlled deceleration to a stop, by injecting a d.c. current into ...
Ideal to satisfy the basic protection requirements for ...
Description:
Ideal to satisfy the basic protection requirements for motor starters; thermal overload and short-circuit. Protection against overloads and short-circuitsProtection against phase failure and phase imbalanceProtection against insulation breaks (equipment protection only)Manual resetClass 10 for 3-phase motors.