RS PRO Door Switch Surface Mount 500mA, 100 V dc, 125 V ac

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

RS Pro Roller Shutter Security Contact and Magnet, Grade 2

Magnetic proximity switches are very tolerant to misalignment and are particularly suited to environments contaminated by dust, dirt, liquid and
where non-contact switching or hygiene is a consideration.
This is a general purpose industrial quality limit, position, security, switch which is fully potted and housed in a rugged polycarbonate moulding. The 3 metre integral cable is protected with an IP67 strain relief cable gland

Normally open, closed loop
Grade 2
Maximum voltage 125Vac / 100Vdc
Tamper loop
0.5 Amp switching current
50mm Operating gap
100 mOhm contact resistance
Temperature range -40 +50° C
Cast Aluminium housing
Ingress protection IP67
4 wire 500mm armoured cable

Note

The switch should not be used in or relied on in safety related applications.

Specificaties
Kenmerk Waarde
Activation Type Proximity Switch
Mounting Type Surface Mount
Switch Configuration Normally Open
Switching Current 500mA
Switching Voltage 100 V dc, 125 V ac
Operating Gap 50mm
Depth 75 (Magnet) mm, 150 (Switch) mm
Height 15 (Switch) mm, 32 (Magnet) mm
Width 40 (Switch) mm, 60 (Magnet) mm
184 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
16,36
(excl. BTW)
19,80
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 16,36
Related Products
Double pole changeover contactsReed based magnetic interference protection2 ...
Description:
Double pole changeover contactsReed based magnetic interference protection2 keys, keyed to differMaximum switching voltage 50 VAC/ DCMaximum switching current 0.5 ACarry current Max 0.8 AMaximum power 10 W/VAInsulation resistance 100 MOhmsContact resistance 120 mOhms180° key rotation (RS 918-2690)60° key rotation ...
Normally open contactsReed based magnetic interference detectionMaximum switching ...
Description:
Normally open contactsReed based magnetic interference detectionMaximum switching voltage 30 V DCMaximum switching current 0.5 ASupervised end of line zone protectionTamper protection14mm operating distanceAdjustable contact resistance with supplied resistorsOperating temperature -40° to +50° CHigh impact ...
A key switch designed for security and alarm ...
Description:
A key switch designed for security and alarm installations where circuit operation is to be limited to authorised personnel. Rust proof Polycarbonate housingTamper switch protectionGrade 3Single pole switchingSturdy all metal barrelSupplied with 2 keysRemovable key in arm and disarm for ...
A tough surface mounted final exit switch. It ...
Description:
A tough surface mounted final exit switch. It uses a vandal resistant button enclosed within a tampered metal enclosure. Stainless steel tamperproof hex screwsRobust powder coated Aluminium housingIntegral buzzerTamper switch protectionGrade 3Selectable resistorsBS EN50131-2-6 ApprovedPositive action buttonThick ...