RS PRO Pressure Mat Surface Mount

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

RS Pro Pressure Mat 4 Wire Out

Floor pressure-pad security switch manufactured from Seem welded black PVC. A black PVC-covered 16/0.2 mm lead-out wires, 300 mm long. Two wires comprise the N/O SPST circuit, whilst two others form a continuous loop. The switch circuit pair has 5 mm pre-stripped ends. The small pressure pad is recommended for use under the stair carpet (RS 918-4756) and the large type is suitable for use under carpets adjacent to doors and windows.

Normally open
25Kg over 50mm2 actuation pressure
Maximum switching voltage 25 V/DC
Maximum switching current 0.25 Amps DC (Resistive)
Carry current Max 0.25 Amps DC (Resistive)
Maximum power 10 W/VA
Ingress protection IP64 (Not waterproof)
Contact resistance 1 Ohm (typical)
Operating temperature -10° to +70° C
Seem welded PVC material
0.22mm2 black PVC insulated cable

Note

Not to be used in machine control safety applications.

Specificaties
Kenmerk Waarde
Mounting Type Surface Mount
Activation Type Pressure Pad Switch
Height 595 mm
Width 170mm
17 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
3 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
9,80
(excl. BTW)
11,86
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 9,80
Related Products
Aavid Thermalloy Turbo Flow liquid cold plates are ...
Description:
Aavid Thermalloy Turbo Flow liquid cold plates are designed for cool the latest high performance IGBTs. Turbo flow plates increase the surface area in contact with the cooling fluid by using unique flow paths thereby increasing thermal transfer performance. The ...
Omron's G6S range of surface mounting relays. Fully ...
Description:
Omron's G6S range of surface mounting relays. Fully sealed constructionHigh dielectric strength between coil and contacts (2000Vac) and between contacts of different polarity (1500Vac)High impulse withstand voltages between coil and contacts, and between contacts of different polarity (2500V, 2x10 μs: ...
FunctionMAX FX10 0.5 mm high-speed 15+Gbit/s SMT board ...
Description:
FunctionMAX FX10 0.5 mm high-speed 15+Gbit/s SMT board to board stacking connectors designed to meet requirements of the industrial market with maximum functionality. The FunctionMAX FX10 connector provides an electrical interface for the OIF 100G Long-Haul DWDM Transmission Module (MSA-100GLH). ...
The JST PH Connectors are designed to meet ...
Description:
The JST PH Connectors are designed to meet the demand for high density connection of internal wires to printed circuit boards. It is compact, highly reliable and low in cost. • Reliable contact • Fully shrouded header • Current rating ...