Interroll M8 Motorised Drive Roller, 50mm x 600mm

  • RS-stocknr. 437-2810
  • Fabrikantnummer 8AFKJAE6FT/H50T
  • Fabrikant Interroll
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

BT 100 Series Motorised Drive Rollers

Roller with integral motor
M8 threaded spindles (bolt/bracket supplied)
Grooved to provide drive to nine slave rollers
Bush type motor
Quiet running with a noise level of approx. 47 dB(A)
Service life of approx. 6000 operating hours (effective running time)
15 starts/stops per minute
Motor Voltage Range: 16 - 28 Vdc
Gear Ratio: 21

Note

Not to be used with Thyristor controlled Power Supply Units

Specificaties
Kenmerk Waarde
Component Type Motorised Drive Roller
Roller Diameter 50mm
Roller Length 600mm
Load Capacity 100kg
Ratio 21
Spindle Thread Size M8
Maximum Conveying Speed 24m/min
Maximim Motor Voltage 30V
Minimum Motor Voltage 18V
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
181,88
(excl. BTW)
220,07
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 181,88
5 - 9
€ 176,27
10 +
€ 170,52
Related Products
PVC rollers offer sound insulation, resistance to chemicals ...
Description:
PVC rollers offer sound insulation, resistance to chemicals and corrosion, impact resistance and reduced susceptibility to marking products. They are low in weight and easy to clean. These are fitted with roller bearings and have spring-loaded spindles. They are available ...
Tried and tested a million times over - ...
Description:
Tried and tested a million times over - universal roller with an extensive range of applicationsSilent conveyor roller - Precision ball bearing, technopolymer bearing housing and seal Protects the ball bearing from coarse dirt and water- Integral water-repellent groove Axial ...
Igus® range of knife-edge conveyor pulleys provide precise ...
Description:
Igus® range of knife-edge conveyor pulleys provide precise and lubricant-free deflection for conveyor technology applications. This product range has three iglidur® materials available: the universal iglidur® P210 the FDA compliant iglidur® A180 (up to 90°C) and the iglidur® A350 (up ...
Heavy duty roller track constructed from galvanised steel, ...
Description:
Heavy duty roller track constructed from galvanised steel, incorporating 50mm diameter dual ball race rollers pitched at 104mm. The roller track may carry a maximum load of 40kg per roller.