Interroll Conveyor Roller

  • RS-stocknr. 740-5027
  • Fabrikantnummer 84VHJAE6FT 600RL +89RA
  • Fabrikant Interroll
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Motorised Drive Roller, Series EC200

Brushless motor with integrated electronics
4 quadrant motor control giving constant speed / torque
Styled double groove to be used with slave rollers and bands
Suitable for applications with high outputs and conveyor weights
Service life of at least 15,000 hours
Up to 30 stop / starts per minute, dependant on application
Wide speed range with high torque
Built in safety features; sensing stalled or blocked conditions and slow running condition
Temperature monitoring
Supplied with EC200/300 control card 89QU

EC200/300 control card 89QU

Universal interface to control the EC200 roller drive
Control speed through rotary switch or PLC
Set run commands
Change direction through switch
Easy mounting to conveyor frame
Fixcon socket to easily accept plug from drive roller
Easy connection to supply or PLC through screw terminals

Comparison table
Roller Length RL (mm) Inside Frame (EL) Width (mm) Ratio Speed Range (m/s) Nominal/Peak Torque (Nm) Stock no.
309 320 16:1 0.11 - 0.74 0.9 / 1.8 408-502
449 460 16:1 0.11 - 0.74 0.9 / 1.8 408-514
599 610 16:1 0.11 - 0.74 0.9 / 1.8 408-508
309 320 48:1 0.04 - 0.25 2.3 / 5.4 408-518
449 460 48:1 0.04 - 0.25 2.3 / 5.4 408-467
599 610 48:1 0.04 - 0.25 2.3 / 5.4 408-463
//media.rs-online.com/t_line/L0408502-01.gif
2 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
286,69
(excl. BTW)
346,89
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 286,69
5 - 9
€ 277,84
10 +
€ 268,77
Related Products
Style Poly V to be used with motorised ...
Description:
Style Poly V to be used with motorised Rollers EC200 Poly V and beltsDrive components are located away from conveying area (important to prevent soiling)Standard Poly V belts, flexible PJ type: ISO9981;DIN 7867; pitch 2.24mmPoly V belts with maximum of ...
5mm polyurethane bands for use with line shaft ...
Description:
5mm polyurethane bands for use with line shaft driven conveyors95mm diameter for roller to drive shaft85mm diameter for roller to roller slave.
Interroll Universal Conveyor Roller Series 1700Two grooves positioned ...
Description:
Interroll Universal Conveyor Roller Series 1700Two grooves positioned as drive rollers for drive bandsLow running noise due to the use of polyamide bearing housings and sealsSecured bearing seatsIntegrated seal in front of the bearing to protect against course dirt and ...
For 25mm diameter shafts to transfer power to ...
Description:
For 25mm diameter shafts to transfer power to drive bands.