- RS-stocknr.:
- 878-7569
- Fabrikant:
- RS PRO
95 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Elk (in een pakket van 5)
€ 1,486
(excl. BTW)
€ 1,798
(incl. BTW)
Aantal stuks | Per stuk | Per pak* |
5 + | € 1,486 | € 7,43 |
*prijsindicatie |
- RS-stocknr.:
- 878-7569
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en compliance
- Land van herkomst:
- TW
Productomschrijving
RS PRO 2 Way Screw DIN Rail, 56.7 mm Length 26 → 12 AWG
Looking for a versatile and easy-to-use earth terminal block? This screw-clamp terminal block from RS PRO is suitable for use with a wide range of wire types and cross-sectional areas. Earth terminals are commonly used for connection to an external conductor, for protection against electric shock in the event of a fault.
This terminal block allows you to connect wires without any special preparation, using simple and secure screw connections. It can be easily clipped to a DIN rail and it unclips just as easily. Once installed, this reliable component requires little in the way of maintenance and its vibration-proof connections mean it will withstand use in tougher industrial environments.
The product is approved by Underwriters Laboratories (UL) and the Canadian Standards Association (CSA) as a safe and effective terminal block. The housing is coloured green and yellow so you can easily identify it as an earth terminal.
This terminal block allows you to connect wires without any special preparation, using simple and secure screw connections. It can be easily clipped to a DIN rail and it unclips just as easily. Once installed, this reliable component requires little in the way of maintenance and its vibration-proof connections mean it will withstand use in tougher industrial environments.
The product is approved by Underwriters Laboratories (UL) and the Canadian Standards Association (CSA) as a safe and effective terminal block. The housing is coloured green and yellow so you can easily identify it as an earth terminal.
Features and Benefits
Cross-sectional area (CSA) of 0.5 to 2.5 mm²
Green/yellow colour
Compatible with DIN rails
Height of 5.8 mm
Length of 56.7 mm
Width of 46 mm
Two ways
Screw termination method
Wire size of 26 to 12 American Wire Gauge (AWG)
Green/yellow colour
Compatible with DIN rails
Height of 5.8 mm
Length of 56.7 mm
Width of 46 mm
Two ways
Screw termination method
Wire size of 26 to 12 American Wire Gauge (AWG)
Specificaties
Kenmerk | Waarde |
---|---|
Earth Block Type | DIN Rail |
Wire Size | 26 → 12 AWG |
Cable CSA | 0.5 to 2.5mm² |
Colour | Green/Yellow |
Number of Ways | 2 |
Termination Method | Screw |
Length | 56.7mm |
Width | 46mm |
Height | 5.8mm |