Catu DT-300 Earth & Ground Resistance Tester 2kΩ CAT III

  • RS-stocknr. 437-803
  • Fabrikantnummer DT300
  • Fabrikant Catu
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Catu Earth & Ground Resistance Tester

The Catu earth and ground resistance tester measure a 1.999kΩ absolute maximum resistance and is having a CAT III safety category. This tester is used to ensure proper operation of the earthing system. It emits a sound signal for continuity checks and directly displays the value on the LED screen. It is also used to measure the electrical characteristics of a system. The measurement of the earth resistance, performed by this device, is based on the measurement principle called "fault loop". The measurement is carried out with an accuracy of (+/-3% +1 digit) on pure resistance, range of 0-200 Ω at 23 °C +/-5°C.

Features and Benefits

Available with a touch point on extension cord of 7m and instructions for use, without a case
Displays the presence of Voltage and the phase position
Measures the earth loop (fault loop) without tripping the circuit breakers: <15 mA
Non-slip coating for a better grip
Once connected to a properly connected installation, the earth value is displayed instantly on the top of the 4-digit LCD display that can indicate earth resistance values ranging between 0 and 100Ω in blue colour digits (at the 100 Ω threshold recommended by NF C 15-100) and between 101Ω and 1999Ω in red colour digits
Operating temperature ranges between -150C and 450C
Total autonomy (without battery)
Two-way use: 2P + T socket or LV switchboard with cord

Certifications

EN 61557-4
IEC 61010-1
IK06 rated
IP40 rated
NF C15-100

Specificaties
Kenmerk Waarde
Absolute Maximum Resistance Measurement 2kΩ
Best Accuracy ±3% + 1 Digit
Display Type LCD
Safety Category CAT III
Power Source Mains
Dimensions 210 x 71 x 51mm
Weight 340g
Height 51mm
Includes Extension Reel, Probe
Length 210mm
Maximum Operating Temperature +45°C
Measurement Type Earth Resistance
Minimum Operating Temperature -15°C
Width 71mm
Model Number p DT-300
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
368,00
(excl. BTW)
445,28
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 368,00
Related Products
Tester for complete and rapid appraisal of earths.Multi-function ...
Description:
Tester for complete and rapid appraisal of earths.Multi-function measurement:Earth resistance, earth coupling, soil resistivity and continuity/resistance.Ergonomic:Rugged, watertight field enclosure with giant backlit LCD display.Direct access to measurements by selector switch.Battery can be recharged from mains ...
DET24C is a clamp-on ground resistance tester that ...
Description:
DET24C is a clamp-on ground resistance tester that set new standards in terms of access, performance, features, simplicity of operation and safety. The units are designed with flat core ends to prevent dirt build-up, ensuring measurement integrity and improved reliability ...
The Megger electrical tester is an MFT1800 series ...
Description:
The Megger electrical tester is an MFT1800 series multifunction installation tester designed for testing low voltage of 100V, 250V,500V, 1000V with German mains plug. This advanced model provides the added benefit of type B RCD testing, 3-pole earth electrode testing ...
This universal tester allows testing of all protective ...
Description:
This universal tester allows testing of all protective measures to DIN VDE 0100 Part 600 and the various sections are defined by VDE 0413 and related international regulations such as IEC 364-6-61. The tester has a high precision and reliabilityThe ...