Samtec MEC1 Series, Female PCB Edge Connector SMT, 16 Way, 2 Row, 1mm Pitch, 2A

  • RS-stocknr. 767-6913
  • Fabrikantnummer MEC1-108-02-L-D-A
  • Fabrikant Samtec
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Samtec 1.0mm MEC1 Series PCB Mini Edge Card Sockets

1.00mm MEC1 series Mini Edge PCB SMT edge card sockets with a double row design that accepts up to 140 polarized gold plated contacts. These 1.00mm MEC1 series Mini Edge card socket connectors are PCB SMT vertical mount, are fully polarized and accept 1.60mm thick cards. MEC1 series PCB Mini Edge card sockets with part numbers ending in 'A' have alignment pins included in the design

Edge Connectors - Samtec

Specificaties
Kenmerk Waarde
Body Orientation Straight
Gender Female
Number of Contacts 16
Number of Rows 2
Pitch 1mm
Mounting Type Surface Mount
Termination Method Solder
Contact Plating Gold over Nickel
Contact Material Beryllium Copper
Current Rating 2A
Voltage Rating 300 V ac
Housing Material Liquid Crystal Polymer
Series MEC1
Width 6.99mm
Minimum Operating Temperature -55°C
Length 12.54mm
Depth 8.89mm
Maximum Operating Temperature +125°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 11-08-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
4,85
(excl. BTW)
5,87
(incl. BTW)
Aantal stuks
Per stuk
1 - 19
€ 4,85
20 - 74
€ 4,61
75 - 299
€ 4,38
300 - 599
€ 4,16
600 +
€ 3,95
Verpakkingsopties
Related Products
Solder tail terminationsMates with 1.58 mm (0.062”) double ...
Description:
Solder tail terminationsMates with 1.58 mm (0.062”) double sided card edge or bus bar tabEnd to End stackableIsolated Segments on opposing contactsRated for Current interruption, enabling true hot-swapping.
EdgeLock wire connectors offer space savings and positive ...
Description:
EdgeLock wire connectors offer space savings and positive locking for secure mating to PCB edge cards. Typically the header is soldered to the PCB, which adds space and assembly steps. Extra steps are involved if rework is required. EdgeLock is ...
The AMP DUOPLUG IDC connector system based on ...
Description:
The AMP DUOPLUG IDC connector system based on the RAST 2.5 standard. These RAST 2.5 AMP DUOPLUG IDC connectors can be used as single piece edge connectors where they fit into existing RAST 2.5 PCB frames or as a 2 ...
0.65 mm pitch micro USB Type A and ...
Description:
0.65 mm pitch micro USB Type A and Type AB connectors with a compact design, a PCB space saving footprint and a high durability of over 10000 insertion cycles. The specification of these micro USB connectors supports OTG (On-The-Go) and ...