Festo Miniature Electric Linear Actuator, 24V dc, 450N, 10.47 m/s
- RS-stocknr.:
- 203-9818
- Fabrikantnummer:
- ERMS-32-180-ST-M-H1-PLK-AA
- Fabrikant:
- Festo
Bekijk deze categorie
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 27-06-2023, met een levertijd van 1 werkdag.
Prijs Each
€ 1.129,98
(excl. BTW)
€ 1.367,28
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 1.129,98 |
- RS-stocknr.:
- 203-9818
- Fabrikantnummer:
- ERMS-32-180-ST-M-H1-PLK-AA
- Fabrikant:
- Festo
- Land van herkomst:
- DE
Wetgeving en compliance
- Land van herkomst:
- DE
Productomschrijving
Festo Rotary Drive Unit - ERMS-32-180-ST-M-H1-PLK-AA
Forming part of Festo's ERMS range of products is this rotary drive unit, a super cost-effective rotary that has been created and designed for simple swivelling tasks with angles of 180°. ERMS-32-180-ST-M-H1-PLK-AA rotary drive can withstand a very high mechanical loading. Also forming part of the Festo's Simplified Motion Series, this drive unit is easy to configure and can be put directly into operation without the use of any software.
Electromechanical
Integrated end-positioning sensing
Can be mounted via internal female thread, assembled via any position
Size - 32
Configurable logic input that is not galvanically isolated
User interface with an LED display
+/- 15 % permissible voltage fluctuations
Fixed stop block positive, fixed stop block negative homing
The logic input specification is based on IEC 61131-2, type 1
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Integrated end-positioning sensing
Can be mounted via internal female thread, assembled via any position
Size - 32
Configurable logic input that is not galvanically isolated
User interface with an LED display
+/- 15 % permissible voltage fluctuations
Fixed stop block positive, fixed stop block negative homing
The logic input specification is based on IEC 61131-2, type 1
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Features & Benefits of the Simplified Motion Series
The simplified motion series combines simplicity of pneumatics with the advantages of electrical automation tasks. The simplified motion series hosts a range of integrated drives which form the perfect solution for those seeking an electric alternative to simple movement and positioning tasks to that of traditional electric drive systems that are usually complex and over complicated.
Includes IO-Link and digital I/O (DIO), removing the need of software in your operation. This design is simply based on "plug and work"
The plug and work principle provides easy commissioning, all parameters are manually adjustable directly on the actuator - no software required
Each drive has been designed for simple movement between two end positions
Provides users with a complete solution with an integrated actuator, motor and servo driver
Designed for swivel tasks, also applications that involve high loads
Has a hollow shaft for the integrated duct for cables and hoses
Standardised mounting interface which is for the direct connection to the electric mini slides EGSL, EGSC and EGSS
Integrated end positioning sensing
Products of the Simplified Motion Series: does not need any external servo drive or any control cabinet for the installation
The plug and work principle provides easy commissioning, all parameters are manually adjustable directly on the actuator - no software required
Each drive has been designed for simple movement between two end positions
Provides users with a complete solution with an integrated actuator, motor and servo driver
Designed for swivel tasks, also applications that involve high loads
Has a hollow shaft for the integrated duct for cables and hoses
Standardised mounting interface which is for the direct connection to the electric mini slides EGSL, EGSC and EGSS
Integrated end positioning sensing
Products of the Simplified Motion Series: does not need any external servo drive or any control cabinet for the installation
Say yes to the Festo Simplified Motion Series
Integrated - The integrated electronics in the drive are the core of the Simplified Motion Series
Simple - For commissioning, simply set all relevant parameters directly on the drive (Speed and force, reference end position and cushioning, manual operation)
Standardised - Electrical connection via M12 plug design (Power 4 pin: power supply for the motor, Logic 8 pin control signal, sensor signal and power for the integrated electronics)
Connected - Use of extended functions possible via IO-Link (Motion parameters can be set remotely, copy and backup function for transferring parameters and read function for extended process parameters)
Simple - For commissioning, simply set all relevant parameters directly on the drive (Speed and force, reference end position and cushioning, manual operation)
Standardised - Electrical connection via M12 plug design (Power 4 pin: power supply for the motor, Logic 8 pin control signal, sensor signal and power for the integrated electronics)
Connected - Use of extended functions possible via IO-Link (Motion parameters can be set remotely, copy and backup function for transferring parameters and read function for extended process parameters)
Specificaties
Kenmerk | Waarde |
Maximum Load | 450N |
Input Voltage | 24V dc |
Actuator Type | Miniature |
Series | ERMS |
Maximum Speed No Load | 10.47 m/s |
Duty Cycle | 100% |
IP Rating | IP40 |
Weight | 2,304g |