Weald Electronics SM-21659-BLK Electrical Installation Tester Cap, Accessory Type Cap, For Use With 2 Pole Connector

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Two Pole Connector

Sub-miniature connectors with gold plated contacts. Plug, Socket and Hood are supplied separately to provide maximum system flexibility. The Hood can be fitted to either the Plug or the Socket. The Plug and the Socket are non-reversible.

6.5mm Diameter mounting hole
6.1mm Cut-out
3.2mm Cable entry
+130°C Max. temperature
50mΩ Contact resistance

Specificaties
Kenmerk Waarde
Accessory Type Cap
For Use With 2 Pole Connector
50 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
965 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
1,65
(excl. BTW)
2,00
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
€ 1,65
€ 8,25
*prijsindicatie
Related Products
A range of hard wearing RoHS compliant, IP68 ...
Description:
A range of hard wearing RoHS compliant, IP68 sealed electrical connectors. The thumb latch mechanism and chunky keyway allows for easy connection and disconnection. Back fittings enable either half to be panel mounted or sealed to a cable. A flange ...
A compact range of free cable plugs (9·5mm ...
Description:
A compact range of free cable plugs (9·5mm dia.) which mate with either panel mount or PCB mount sockets, all incorporating PEEK insulating material. Free plugs and panel sockets contain solder bucket contacts. Cable plugs will mate with Chassis, PCB ...
Megger SIA10 Socket Interface adapter provides a safe ...
Description:
Megger SIA10 Socket Interface adapter provides a safe and simple solution to testing insulation and continuity at a 13 A UK power socket. Without the need to disassemble the socket and risk exposing live conductors.Megger socket adapter is ideal for ...
3-phase current adapter for connecting test instruments to ...
Description:
3-phase current adapter for connecting test instruments to 5-pole CEE outlets. These adapters correspond to 5-pole CEE sockets with nominal current Phase sequence testing with signal lamps Testing for effectiveness of protective measures with five 4mm contact protected sockets.