Megger 1002-001 Electrical Installation Tester Lead, Accessory Type Lead, For Use With MIT 400 Series, MIT 410 Series

  • RS-stocknr. 448-7928
  • Fabrikantnummer 1002-001
  • Fabrikant Megger
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

MIT400 Series Digital Insulation & Continuity Testers

All instruments meet IEC1010, HD384 and BSEN61557, and are sealed to IP54 for weatherproof performance.Easy to hold and comfortable to use, the large display provides the unique combination of two digital readouts and an analogue arc.All primary results are displayed in the larger digital display and repeated on the analogue arc. Additionally, auxiliary test information such as frequency, leakage current, Insulation or `circuit voltage etc is displayed in the smaller secondary digital display.Rubber over-moulding combines the tough shock absorbing outer protection with excellent grip, on a strong modified ABS housing, providing an almost indestructible case.Battery requirements are 5 AA batteries of either standard Alkaline (supplied) or Nickel Metal Hydride (NiMH) rechargeable type.

All models feature:

Insulation testing to 1000V with Insulation test voltage displayContinuity testing at 200mA down to 0.01ohmsAlternative 20mA test currentAC/DC Voltage measurementTrue RMS Measurement to 600V50V Live circuit test inhibitComplies with EN61010-1 CATIV 600VIP54 weatherproof housingHard carry caseOptional SP5 switched probe with remote test button for single-handed operation

Note

RS is an authorised Megger distributor. Purchased though RS this product is eligible for the Megger extended 3 Year warranty

Supplied with

Durable hard carry case, silicone test lead set, AA alkaline batteries & instructions.

Megger Test Lead

The Megger tester lead is a high-quality double-insulated lead use for MIT 400 series, MIT 410 series. This is a 2-wire set, suitable for a wide range of megger testers. Megger is famous for quality and these double insulated leads are no exception, with safety shrouded banana plugs for ease, also making them suitable for all multimeters, clamp meters and insulation testers, which will take 4mm (0.16in) connectors.

Features and Benefits

Extended probes suitable for testing in deep terminals Length of the wire for the test lead is 1.4m Supplied with crocodile clips

Certifications

GS38 compliant

Specificaties
Kenmerk Waarde
Accessory Type Lead
For Use With MIT 400 Series, MIT 410 Series
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was € 61,49
51,00
(excl. BTW)
61,71
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 51,00
Related Products
This earth & ground resistance tester from our ...
Description:
This earth & ground resistance tester from our trusted and reliable own brand RS PRO is a high quality device used to test a range of equipment such as motors, generators, wires and switch gear to ensure a safe path ...
Insulation resistance testers are used to ensure the ...
Description:
Insulation resistance testers are used to ensure the insulation of wiring is safe, or undamaged after electrical work has been carried out. Testers or megohmmeters are vital in preventing tripped fuses, electrical equipment and instrument breakdown, risk of electric shock ...
The Fluke 1550C Tester together with the IR3000 ...
Description:
The Fluke 1550C Tester together with the IR3000 FC connector and Fluke Connect App allow users to perform advanced insulation testing by wirelessly transfering test results from the tester to Fluke Connect which eliminates error-prone paperwork and saves your technician's ...
A portable digital flash tester incorporating an electronically ...
Description:
A portable digital flash tester incorporating an electronically controlled variable test voltage and safety flash probe, suitable for testing to 17th Edition Regulations (BS7671). Selectable 120/240V, 50/60Hz operationIncorporates a solid state regulator to give stepless voltage adjustment, with safety zero ...