Megger MFT1835 Electrical Tester

  • RS-stocknr. 704-0487
  • Fabrikantnummer 1002-415
  • Fabrikant Megger
Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: GB
Productomschrijving

Megger Multifunction Tester

The Megger electrical tester is an MFT1800 series multifunction installation tester designed for testing low voltage of 100V, 250V,500V, 1000V with German mains plug. This advanced model provides the added benefit of type B RCD testing, 3-pole earth electrode testing with attached rod technique and stakeless testing to a downloading and rechargeable instrument. To reduce the cost of ownership, it has rechargeable batteries and has charge time is less than 4 hours

Features and Benefits

3-terminal earth test and stakeless testing for spike resistance measurement
Full input protection and safety warnings when a hazardous voltage is present
Internal memory and Bluetooth communication
Simple colour-coded test selection and large clear backlit display for ease of use
Two and three wire non-trip loop testing for RCD protected circuits

Applications

Commercial sites
Industrial sites
Residential sites

Certifications

EN61010 CATIV
IEC 61010 CAT IV 300 V
IEC60364
IP54 rated

Specificaties
Kenmerk Waarde
Loop Impedance Test Type 2 Wire
Automatic RCD Test Yes
RCD Ramp Test Yes
Non-Tripping Yes
Insulation Test Voltage 100 V, 250 V, 500 V, 1000 V
Maximum Voltage Measurement 600V
Test Type Continuity, Wiring Polarity
Earth Resistance Measurement Yes
Downloadable Data Yes
Interface Type German Mains
Continuity Test Current 15 mA, 200 mA
RCD Test Type AC Type, DC Selective
Test Standards BS 7671, IEC 60364, IEC 61010-031, IEC 61010-1, IEC 61010-30, IEC 61557, VDE 0100
Maximum Continuity Resistance 9.99Ω
Safety Category Voltage 300 V, 600 V
Battery Type AA
Safety Category CAT III 600 V, CAT IV 300 V
Display Type LCD
Maximum Operating Temperature +55°C
Power Source Battery
Safety Category Level CAT III, CAT IV
Weight 1kg
Model Number p MFT1835
Minimum Continuity Resistance 0.01Ω
IP Rating IP54
Minimum Operating Temperature -10°C
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
1.470,00
(excl. BTW)
1.778,70
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.470,00
Related Products
All instruments meet IEC1010, HD384 and BSEN61557, and ...
Description:
All instruments meet IEC1010, HD384 and BSEN61557, and are sealed to IP54 for weatherproof performance.Easy to hold and comfortable to use, the large display provides the unique combination of two digital readouts and an analogue arc.All primary results are displayed ...
Master package PROFiTEST INTRO, consisting of PROFiTEST INTRO ...
Description:
Master package PROFiTEST INTRO, consisting of PROFiTEST INTRO M520T, Test probe with remote release Z550A, Vario-Plug-Set Z500A, Set-Probes Z50F, PROSchuko-Measuring-Adapter Z503K, PRO-Jumper Z503J, SORTIMO L-BOXX Z503D, Foam SORTIMO L-BOXX Z503O, Battery Pack Master Z502H and chargerZ502R. Measurement of RLO, ...
All instruments meet IEC1010, HD384 and BSEN61557, and ...
Description:
All instruments meet IEC1010, HD384 and BSEN61557, and are sealed to IP54 for weatherproof performance.Easy to hold and comfortable to use, the large display provides the unique combination of two digital readouts and an analogue arc.All primary results are displayed ...
A range of insulation testers that meet the ...
Description:
A range of insulation testers that meet the relevant requirements of EN61557, BS7671, HD 384, IEC 364 and VDE 0413 for applications in all aspects of electrical contracting, building maintenance, testing, inspection and servicing. 20mm LCD display with true analogue ...