- RS-stocknr.:
- 794-3761
- Fabrikantnummer:
- 2903361
- Fabrikant:
- Phoenix Contact
Bekijk deze categorie
32 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1867 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Prijs Each
€ 7,96
(excl. BTW)
€ 9,63
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 7,96 |
5 - 9 | € 7,73 |
10 + | € 7,46 |
- RS-stocknr.:
- 794-3761
- Fabrikantnummer:
- 2903361
- Fabrikant:
- Phoenix Contact
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
Phoenix Contact Interface Relay, 6A Limiting Continuous Current, 1NO Contact Configuration - RIF-0-RPT-24DC/ 1 - 2903361
For dependable control of your industrial circuits, wire up this interface relay from Phoenix Contact. It uses inputs of 19.2 to 36V DC to make or break a connected electrical circuit with a voltage rating between 5 and 250V AC/DC. Galvanic isolation limits interference to ensure you get the benefit of reliable signalling efficiency.
Dimensions of 6.2 (W) x 93 (H) 66mm (D) mean this is a small bit of kit that squeezes into tight setups. With its broad operating temperature range between -40°C and +60°C, it also stands up to challenging environments. You'll know at a glance when the device is hard at work, thanks to its yellow LED status indicator. Relays like this one can be commonly found in automation networks and medical technology.
Dimensions of 6.2 (W) x 93 (H) 66mm (D) mean this is a small bit of kit that squeezes into tight setups. With its broad operating temperature range between -40°C and +60°C, it also stands up to challenging environments. You'll know at a glance when the device is hard at work, thanks to its yellow LED status indicator. Relays like this one can be commonly found in automation networks and medical technology.
Features & Benefits
Mechanical service life of 20 million cycles shows that it's highly reliable
Tested up to 6kV for protection against sudden voltage surges
Typical input current of 9mA, so it's an energy-saving component
Supports mounting in any position to give you flexible installation options
Base is IP20-rated, indicating it's finger-safe and protected against objects larger than 12mm
Tested up to 6kV for protection against sudden voltage surges
Typical input current of 9mA, so it's an energy-saving component
Supports mounting in any position to give you flexible installation options
Base is IP20-rated, indicating it's finger-safe and protected against objects larger than 12mm
Specificaties
Kenmerk | Waarde |
Coil Voltage | 24V dc |
Contact Configuration | SPST |
Mounting Type | DIN Rail |
Number of Poles | 1 |
Minimum Input Voltage | 19.2V |
Maximum Input Voltage | 36V dc |
Switching Voltage | 5 → 250V |
Terminal Type | Plug In |
Depth | 66mm |
Height | 93mm |
Length | 6.2mm |
Series | RIF-0-RPT-24DC/1 |
Contact Material | Silver Alloy |
Input Current | 9mA |
Input Voltage Range | 19.2 → 36V dc |
Maximum Operating Temperature | +60°C |
Special Features | IP20 |
Dimensions | 6.2 x 66 x 93mm |
Operating Temperature Range | -40 → +60°C |
Relay Switching Classification | Power Contact Relay |
Relay Type | Power Contact Relay |
Life | 20000000 (Mechanical) cycles |
Minimum Operating Temperature | -40°C |