Siemens Emergency Stop Push Button, Surface Mount, SPST, IP67
- RS-stocknr.:
- 742-9271
- Fabrikantnummer:
- 3SB3801-2DG3
- Fabrikant:
- Siemens
Informatie over voorraden is momenteel niet toegankelijk
- RS-stocknr.:
- 742-9271
- Fabrikantnummer:
- 3SB3801-2DG3
- Fabrikant:
- Siemens
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Siemens | |
| Mounting Type | Surface Mount | |
| Contact Configuration | SPST | |
| Illuminated | No | |
| IP Rating | IP67 | |
| Depth | 114mm | |
| Width | 85mm | |
| Bezel Material | Plastic | |
| Push Button Material | Plastic | |
| Height | 85mm | |
| Alles selecteren | ||
|---|---|---|
Merk Siemens | ||
Mounting Type Surface Mount | ||
Contact Configuration SPST | ||
Illuminated No | ||
IP Rating IP67 | ||
Depth 114mm | ||
Width 85mm | ||
Bezel Material Plastic | ||
Push Button Material Plastic | ||
Height 85mm | ||
- Land van herkomst:
- DE
The mounting type of the enclosure of this 3SB3801-2DG3 can be vertically only.
The high quality falls under degree of protection IP67, which means ’’dust tight’’ and protected against immersion.
The ambient temperature during operation ranging from -25°C to +70°C, during storage -40°C to +80°C.
This is a typical emergency off/stop function device with a vibration resistance 20 ... 200 Hz: 5g (acc. to IEC 60068-2-6).
The high quality falls under degree of protection IP67, which means ’’dust tight’’ and protected against immersion.
The ambient temperature during operation ranging from -25°C to +70°C, during storage -40°C to +80°C.
This is a typical emergency off/stop function device with a vibration resistance 20 ... 200 Hz: 5g (acc. to IEC 60068-2-6).
Frequently asked questions & answers
What is the different between a push button switch for an emergency stop and a general-purpose push button switch?
A general-purpose push button switch is used for controls, e.g. to start machine operation or simply to switch modes. An emergency stop push button switch however, is mainly used as a safety measure to stop hazardous events.
What is a category for taking back electrical and electronic equipment after use?
There are no obligations to take back electrical and electronic equipment after use.
PHASE OUT NOTIFICATION
This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the new pushbutton range SIRIUS ACT which is the alternative range proposed by the manufacturer. Please refer to the 3SB3 / SIRIUS ACT cross-reference guide located in the technical reference section.